search

trevos3d / K1-USB-Cam

Add USB Webcam to Creality K1 Printer
46 stars 5 forks source link

Stop working on actual fluidd #8

Open MaxMechanick opened 8 months ago

MaxMechanick commented 8 months ago

Hey, Used ur scripde a while without problem. After the last update of fluidd, no cam can be displayed.

Made a whole factory restore and installed everything new. But still have the same problem.

If I uninstall it, I got only the usb cam displayed, but can't access the k1 cam anymore... Have to do a second reset to get back to the k1 cam.

trevos3d commented 8 months ago

Hi dude, I’ll look what was change on new firmware version to cause this issue.

I didn't get this issue here. What your current firmware version installed?

Em seg., 12 de fev. de 2024 às 16:07, MaxMechanick @.***> escreveu:

Hey, Used ur scripde a while without problem. After the last update of fluidd, no cam can be displayed.

Made a whole factory restore and installed everything new. But still have the same problem.

If I uninstall it, I got only the usb cam displayed, but can't access the k1 cam anymore... Have to do a second reset to get back to the k1 cam.

— Reply to this email directly, view it on GitHub https://github.com/trevos3d/K1-USB-Cam/issues/8, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDDLT2FWWAAC6WX2PSAO5WLYTJR65AVCNFSM6AAAAABDFHY456VHI2DSMVQWIX3LMV43ASLTON2WKOZSGEZTANZXGY3TQMQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

MaxMechanick commented 8 months ago

I have fw1.3.3.5 installed and used the helper script to made the fluidd installation.

So far the "only USB cam" works but not the k1+usb And fluidd version : 1.28.0

MaxMechanick commented 8 months ago

Just reinstalled everything and tryed again with all fresh setup. Installed just fluidd with the helper script and than used ur script to install K1 + usb. Resoult, non of both cams get displayed. Tryed around a bit with the fluidd settings but no way.

Than I tryed to remove the k1+usb and install the usb only. This works sofar, but can only access the stream in fluidd and not in obico.

After that I removed the usb script completely and get back to the build in cam. In fluid it works and I see the k1 cam again. But not in creality print...

So far it only works with usb only and without the build in cam.

Now I try to downgread fluidd fw to last know working status and set up all again.

Hope this helps to detect the failure and get rid of it.

trevos3d commented 8 months ago

Hi dude, thanks for all infos. Can you provide what camera brand and model are you using?

Em qua., 14 de fev. de 2024 às 04:55, MaxMechanick @.***> escreveu:

Just reinstalled everything and tryed again with all fresh setup. Installed just fluidd with the helper script and than used ur script to install K1 + usb. Resoult, non of both cams get displayed. Tryed around a bit with the fluidd settings but no way.

Than I tryed to remove the k1+usb and install the usb only. This works sofar, but can only access the stream in fluidd and not in obico.

After that I removed the usb script completely and get back to the build in cam. In fluid it works and I see the k1 cam again. But not in creality print...

So far it only works with usb only and without the build in cam.

Now I try to downgread fluidd fw to last know working status and set up all again.

Hope this helps to detect the failure and get rid of it.

— Reply to this email directly, view it on GitHub https://github.com/trevos3d/K1-USB-Cam/issues/8#issuecomment-1943242115, or unsubscribe https://github.com/notifications/unsubscribe-auth/BDDLT2GZSPIIDMW65LZNEXLYTRUWPAVCNFSM6AAAAABDFHY456VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBTGI2DEMJRGU . You are receiving this because you commented.Message ID: @.***>

MaxMechanick commented 8 months ago

Atm I am using a Logitech g922 and the stock Ai cam for K1. Tryed also some other webcams but same result. Atm I made a factory reset and use just the stock Ai cam