Open s0n1cx opened 2 years ago
Overall, eth jumped from 450MH/s to 460MH/s LHR jumped from below 73 to 74.9% but my FHR drop a 2~3%. ALPH jumped from 2G to 3GH/s. My current EVGA 3080Ti ETH jumped from 85 to above 92 and ALPH current at 900MH/s. Very good result. My 3080Ti setting --lock-cclock 1850 --mclock 1600 --pl 79. I am still using 472.12 driver and mining at 2miners.
Overall, eth jumped from 450MH/s to 460MH/s LHR jumped from below 73 to 74.9% but my FHR drop a 2~3%. ALPH jumped from 2G to 3GH/s. My current EVGA 3080Ti ETH jumped from 85 to above 92 and ALPH current at 900MH/s. Very good result. My 3080Ti setting --lock-cclock 1850 --mclock 1600 --pl 79. I am still using 472.12 driver and mining at 2miners.
What is your current power consumption in watts?
Yeah same issues, my alph hashrate halfed with 25.8 on duel mining with a 3070ti. Just going to use 25.6 till this gets fixed.
For this new version same issues here when dual mining. It’s apparently ok for my 2 3080ti EVGA FTW3, I saw a small drop on ETH (80 to 76) but a great increase on ALPH (650 to 850). But for my 3080ti EVGA XC3 I saw drop on ETH and in ALPH (650 to less than 300)
Yeah same issues, my alph hashrate halfed with 25.8 on duel mining with a 3070ti. Just going to use 25.6 till this gets fixed.
For me 25.6 is not appearing the ALPH hashs on HiveOS. I falled back to 25.2
Only complaint - temperature is getting high (88-93c) - had to feed more power to get a better mining rates from 25.2 to 8 - actually getting good mining rates with ETH 70mhs and ALPH 1.05ghs on RTX3080 - updated driver too 511.79
Hi,
i'm getting only ~ 300MH/s @ALPH while dual mining with the RTX 3080 Ti. The temps are also higher.
I got no issues with the previous Version 0.25.2 hitting ~ 600 MH/s
My Driver: 496.49