Closed danielmoralesdev closed 2 years ago
Read the trex log when the miner starts or the miner itself when it starts in 25.8, the number assigned to LHR ratio is automatic regardless of settings indicated by 'r" or 'h' command under dual-algo-mode per README.md. In 25.8 this ratio is viewable in the miner whereas in 25.6 it is not. It clearly has a strong impact on watts somehow as well. Hopefully this setting can be tweaked manually in a later version.
@tjayz thanks for commenting, what you had said makes a lot of sense. I read documentation and looks like there is a formula to define lhr ratio but no idea how to apply it, so better explanation from trex team side would be appreciated
It has to do with oc, I just followed https://hashrate.no/ settings based on my cards, then ran 25.8 and it worked (ALPH good improvement).
0.25.6 Each card was about 250 Mh/s
0.25.6 Each card is about 50 MH/s
Same settings. So what's going on, release says "Improve ETH+ALPH dual mining performance for LHR cards"??