search

trexminer / T-Rex

T-Rex NVIDIA GPU miner with web control monitoring page
2.63k stars 438 forks source link

evga rtx 3060ti ftw3 lhr dual mining #724

Open krondoe opened 2 years ago

krondoe commented 2 years ago

im not getting anywhere with this dual mining seems like i get 60mhs for ergo then 12 for eth and then it goes up and down. whats the best settings for a 3060ti or is it better to just mine daggerhash ethash for 43 mhs?

krondoe commented 2 years ago

i keep getting an lhr lock and then it stops at lhr 10 all the way from 30 it goes down to 10 and stays there. whats should i should pick and lhr between 30 and 10 and type in autotune mode off at the end before pause

mlyons201 commented 2 years ago

I am having same problems cannot get the card to stop locking. Using these settings with T-Rex --pl 60 --lhr-tune 71.5 --lock-cclock 1250 --cclock 0 --mclock 1300

Crisis83 commented 2 years ago

I found with my 3060ti that I need to play around with the clocks to get LHR tuning stable. Right now It’s set at -LHR-Tune 36 core 1400 mclock 800. If I lower core (thus power) it gets worse, same for increasing it. Yes the mclock is really low, absolute speed is 1950Mhz which is a lot lower than my 3060 LHR cards. I get a stable 22MHs with ETH and 82MHs on Ergo as measured 1 day average on the pool side. The miner will fluxtuate, but T-rex shows average shares per minute (multiply by 60 if you want per hour) so that gives you an idea as well of average speed. If I start the miner with say LHR-Tune 37 or 38 I noticed that it might not trigger LHR but the hashrates are bad and one test I managed to get 0 shares in a 20min test, but hashrate is still reporting 23-24MHs. Test each setting at least 15 minutes to get an idea what it’s doing, the reported hashrate might sometimes not be 100% accurate, look at the shares average as well, it reported next to the current shares per minute in (). Reported hashrates for me are now matching the pool roughly once I found settings the card liked.

Crisis83 commented 2 years ago

Forgot to mention if it keeps locking lower the clocks. Then work up from there. Then play around with LHR ratios, I started at LHR 30 and found 36 to work best.

piepsieboy2 commented 2 years ago

i have the exact same problem with the evga 3060 ti triple fan. i cant get it to unlock, it just keeps trying to but never gets it. i have tried almost everything, like trying lhr tune values or letting it run from 100 to 10 lhr tune with no succes. also locking boosting or locking core and mem clocks or using different power limits. i feel like there has to be a sweet spot for it to work but i just cant find it. if anyone has any tips, please leave them below.

krondoe commented 2 years ago

im currently back on ethash mining on daggerhashimoto on the evga 3060ti lhr. I'm currently on nicehash miner with 43mhs. settings on msi after burner are -502 core clock, 70 power, 1400 memory clock . running in msi shows 1300-1450mhz gpu clock, 8200 mhz memory clock, 1000mv voltage. I'm currently not getting any over target shares rejected. I only some rejections do to connection job not found. i am running on wifi not rj45 cable. I also have the evga xc 3060 lhr mining with raven coin and ethash dual mining. around 19mhs on eth and 14.50 mhs on rvn coin with these msi settings and driver 496.13 on both cards. core clock 100, power 75, memory clock 1400 and lhr tune 36 added to trex eth/rvn miner config file. on msi afterburner it shows it runs at 1440-1700 mhz on gpu clock and 8700 on memory clock and 900mv on voltage. i will post updates on tunes if i find something that works better or new unlocks for lhr card. thanks for the comments guys!

On Tue, Oct 26, 2021 at 7:49 AM piepsieboy2 @.***> wrote:

i have the exact same problem with the evga 3060 ti triple fan. i cant get it to unlock, it just keeps trying to but never gets it. i have tried almost everything, like trying lhr tune values or letting it run from 100 to 10 lhr tune with no succes. also locking boosting or locking core and mem clocks or using different power limits. i feel like there has to be a sweet spot for it to work but i just cant find it. if anyone has any tips, please leave them below.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/trexminer/T-Rex/issues/724#issuecomment-951905809, or unsubscribe https://github.com/notifications/unsubscribe-auth/AWBESO7YABGRSERKSM2BJM3UI2WX3ANCNFSM5F4MYAXQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

mlyons201 commented 2 years ago

Thanks I will set mine up and see how it goes. Currently using pheonixminer and steady at 34 MH/s

Mike Lyons

On Oct 26, 2021, at 6:39 PM, krondoe @.***> wrote:

 im currently back on ethash mining on daggerhashimoto on the evga 3060ti lhr. I'm currently on nicehash miner with 43mhs. settings on msi after burner are -502 core clock, 70 power, 1400 memory clock . running in msi shows 1300-1450mhz gpu clock, 8200 mhz memory clock, 1000mv voltage. I'm currently not getting any over target shares rejected. I only some rejections do to connection job not found. i am running on wifi not rj45 cable. I also have the evga xc 3060 lhr mining with raven coin and ethash dual mining. around 19mhs on eth and 14.50 mhs on rvn coin with these msi settings and driver 496.13 on both cards. core clock 100, power 75, memory clock 1400 and lhr tune 36 added to trex eth/rvn miner config file. on msi afterburner it shows it runs at 1440-1700 mhz on gpu clock and 8700 on memory clock and 900mv on voltage. i will post updates on tunes if i find something that works better or new unlocks for lhr card. thanks for the comments guys!

On Tue, Oct 26, 2021 at 7:49 AM piepsieboy2 @.***> wrote:

i have the exact same problem with the evga 3060 ti triple fan. i cant get it to unlock, it just keeps trying to but never gets it. i have tried almost everything, like trying lhr tune values or letting it run from 100 to 10 lhr tune with no succes. also locking boosting or locking core and mem clocks or using different power limits. i feel like there has to be a sweet spot for it to work but i just cant find it. if anyone has any tips, please leave them below.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/trexminer/T-Rex/issues/724#issuecomment-951905809, or unsubscribe https://github.com/notifications/unsubscribe-auth/AWBESO7YABGRSERKSM2BJM3UI2WX3ANCNFSM5F4MYAXQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.