stucking at 'uncompressing linux....' on beagle c3 -- using pre built android

GoogleCodeExporter commented 9 years ago

What steps will reproduce the problem?
1.my board is beagle c3 and i am using pre-built image of beagle XM

I tried as said in comment 2, issue 58(commented by batuoc...@gmail.com ), but 
is stuck at 'uncompressing linux...........'
I tried all commands bootargs and bootcmd , saveenv and boot as specified in 
comment 2

At one time I got some messages into the hyper-terminal and they are shown in 
attatched file along with that environment.

But when I tried a reset then it is stuck at 'uncompressing linux......'

my present environment that is stucking at the 'uncompressing linux....' is 
shown in another attatched file.
2.my present environment size is 1403/131068 bytes.
when i got some messages into the hyper-terminal,environment size at that time 
is 1508/131068 bytes.
but both are looking same when printed with printenv.
3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by vmadhu...@gmail.com on 9 Nov 2010 at 7:00

Attachments:

[messages & env](https://storage.googleapis.com/google-code-attachments/rowboat/issue-59/comment-0/messages & env)
[present env](https://storage.googleapis.com/google-code-attachments/rowboat/issue-59/comment-0/present env)

GoogleCodeExporter commented 9 years ago

I am facing the same issue. I am porting froyo to beagleboard rev c3.
On rebooting board from MMC, it hangs at "Uncompressing Linux".
@vmadhu: Any luck with this issue?

Original comment by vip04...@gmail.com on 15 Feb 2011 at 7:04

GoogleCodeExporter commented 9 years ago

I did not connected any monitor/display unit to the beagle board while i am 
booting the android, that's why i did not come to know that android is 
booting.And one other mistake i had done is using beagle xm images. Use c4 pre 
built images they will work perfectly. If u r using c4 prebuilt images then 
problem may be with boot args & boot commands.compare ur environment with that 
is present in the attched 'present env' file.I am using Dell lcd monitor.

Original comment by vmadhu...@gmail.com on 16 Feb 2011 at 4:03

truman2159 / rowboat

stucking at 'uncompressing linux....' on beagle c3 -- using pre built android #59