search

trungvinh1991 / siphon

Automatically exported from code.google.com/p/siphon
0 stars 0 forks source link

Cannot hear the person being called #146

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Load Siphon.
2. Dial a call on the virtual keypad or select caller from the Recents or
Contacts list.

What is the expected output? What do you see instead?
Person being called can hear me; however, I cannot hear the person I
called.  Handset speaker (not speaker-phone) produces no sound.

What version of the product are you using? On what operating system?
1st Gen. iPhone with firmware 2.2.1 (5H11).  Siphon 2.0.3-1.

Please provide any additional information below.

Toggling speaker-phone on/off has no effect (still can't hear anything).

Issue seems to occur randomly.  Usually re-launching Siphon multiple times
will resolve it.

Issue did not exist with iPhone firmware 2.2 and Siphona 2.0.2.

Siphon installed with Cydia.

Original issue reported on code.google.com by dave.mac...@gmail.com on 4 Feb 2009 at 6:15

GoogleCodeExporter commented 9 years ago 
How cool is that.  I owe you a cheeseburger Amigo.  We'll give it a try.  Many 
thanks
from me and from my son.

Original comment by leopriv...@tellawcomlabs.com on 26 Oct 2009 at 11:36

GoogleCodeExporter commented 9 years ago 
the problem come from your firewall.modifiy your rules or access list in order 
to 
let sip packets come in your lan.
for Netscreen:
set policy id x from "Untrust" to "Trust" "Remote_addr" "local_addr" "SIP" 
permit 
log

Original comment by trivi...@access-diffusion.fr on 28 Oct 2009 at 8:22

GoogleCodeExporter commented 9 years ago 
After switching from an iPhone 2G to an iPhone 3G, it works perfectly.

Original comment by jschlei...@gmail.com on 28 Oct 2009 at 8:34

GoogleCodeExporter commented 9 years ago 
i'm having this issue - audio is also choppy. Im on 3G-S latest firmware 3.0.2

Original comment by mcapu...@gmail.com on 6 Nov 2009 at 1:46

GoogleCodeExporter commented 9 years ago 
Im also having this issue. I have an ipod touch 1st gen running firmware 3.1.2 
siphon version 2.1.0. I am using 
gizmo5 and google voice. I cannot hear the person on the other end.

Original comment by briancen...@gmail.com on 14 Nov 2009 at 5:28

GoogleCodeExporter commented 9 years ago 
Listen people,

I know it's not the answer you want to hear, but at some point you fucked up 
Siphon; either by upgrading 
and having old/bad config settings, or just upgrading can do it. That's the 
reason why this issue never 
occurs after a fresh install. You can either try and search through your 
filesystem, deleting anything 
resembling siphon, or restore and reinstall from scratch. Works every time.

Comment 52 is wrong, because most sip servers support nat transversal, or the 
problem would go away 
on different networks.

Original comment by thesh...@gmail.com on 14 Nov 2009 at 6:25

GoogleCodeExporter commented 9 years ago 
theshaze, I have only installed it once and I started having this issue right 
away 
in my first call. I researched further and found that I don't hear the other 
party 
only on 3g, over wifi it was working fine. I finally resolved it by turning off 
NAT 
and removing the STUN server (I'm on Gizmo and I initially set these params 
because 
I couldn't connect at all). So now it's working good on both 3g and wifi, 
except for 
the long periods of Gizmo down time when I either cannot connect or call.

So everybody who is with Gizmo, try to remove any extra config settings you 
might 
set except for username, password, and sip server and see if you will hear 
initial 
beeps and the other party in outbound calls. I usually have up to 8 seconds of 
delay 
after I place a call and before I hear the first beep.

Original comment by aleksand...@gmail.com on 15 Nov 2009 at 12:17

GoogleCodeExporter commented 9 years ago 
It seems there are a problem with Gizmo :-(
BUt now Google bought Gizmo5, I don't know if it will be possible to resolve the
issue :-(

Original comment by samuelv0...@gmail.com on 15 Nov 2009 at 9:49

GoogleCodeExporter commented 9 years ago 
I was able to fix it by killing ipod and pandora when this happened to me

Original comment by sbing...@gmail.com on 1 Mar 2010 at 8:30

GoogleCodeExporter commented 9 years ago 
This problem still persists. Running Siphon 2.2 on OS 3.0 on 2G iphone.

Audio always work when using headset. Audio may or may not work without headset
either in speaker mode, or speakerphone mode. Seems random.

Original comment by missings...@gmail.com on 26 Apr 2010 at 8:49