trustedsec
commented
7 years ago We don't typically support other distros - since BackBox is Ubuntu based - guessing it doesn't have apt installed by default. I've added a check for aptitude just to help out the process. Should work OK now.
If you are talking about the specific installer for kingphisher - I will need to take a look at that and contact the authors.
I am new to Git and the last instance on this update said to open an issue if I am running BackBox and the update didn't recognize that I was, which is what happened. I tried uploading the log of the update and Kernel and Software information but had issues so I copied and pasted it here. Should I do anything else? I apologize ahead of time if this is not even close as to what I am supposed to do. Regards,
[] Sending after command: cd /pentest/exploitation/metasploit/ [] Sending after command: mv msfupdate.erb msfinstall [] Sending after command: chmod 755 msfinstall [] Sending after command: ./msfinstall Adding metasploit-framework to your repository list..N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension OK Updating package cache..OK Checking for and installing update.. Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: metasploit-framework 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 147 MB of archives. After this operation, 44.8 MB of additional disk space will be used. Get:1 http://downloads.metasploit.com/data/releases/metasploit- framework/apt lucid/main amd64 metasploit-framework amd64 4.13.9+20161220103018~1rapid7-1 [147 MB] Fetched 147 MB in 56s (2,582 kB/s) N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension (Reading database ... 280862 files and directories currently installed.) Preparing to unpack .../metasploit- framework_4.13.9+20161220103018~1rapid7-1_amd64.deb ... Unpacking metasploit-framework (4.13.9+20161220103018~1rapid7-1) over (4.13+git20161130-0backbox1) ... dpkg: warning: unable to delete old directory '/opt/metasploit- framework/config': Directory not empty Setting up metasploit-framework (4.13.9+20161220103018~1rapid7-1) ... update-alternatives: using /opt/metasploit-framework/bin/msfbinscan to provide /usr/bin/msfbinscan (msfbinscan) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfconsole to provide /usr/bin/msfconsole (msfconsole) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfd to provide /usr/bin/msfd (msfd) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfdb to provide /usr/bin/msfdb (msfdb) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfelfscan to provide /usr/bin/msfelfscan (msfelfscan) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfmachscan to provide /usr/bin/msfmachscan (msfmachscan) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfpescan to provide /usr/bin/msfpescan (msfpescan) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfrop to provide /usr/bin/msfrop (msfrop) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfrpc to provide /usr/bin/msfrpc (msfrpc) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfrpcd to provide /usr/bin/msfrpcd (msfrpcd) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfupdate to provide /usr/bin/msfupdate (msfupdate) in auto mode update-alternatives: using /opt/metasploit-framework/bin/msfvenom to provide /usr/bin/msfvenom (msfvenom) in auto mode Run msfconsole to get started Updating BackBox console menu ... N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension W: --force-yes is deprecated, use one of the options starting with -- allow instead. [] Sending after command: rm msfinstall 1> /dev/null 2>/dev/null [] Sending after command: update-rc.d postgresql enable [] Sending after command: chmod +x /home/jay/Downloads/ptf-master/ modules/exploitation/msfdb.sh [] Sending after command: sh /home/jay/Downloads/ptf-master/modules/ exploitation/msfdb.sh 1> /dev/null 2> /dev/null [] Sending after command: mkdir /root/.msf4 1> /dev/null 2>/dev/null [] Sending after command: cp /opt/database.yml /root/.msf4/ [] Sending after command: rm -rf /pentest/exploitation/metasploit/ 1> /dev/null 2> /dev/null [] Sending after command: mkdir /pentest/exploitation/metasploit/ 1> /dev/null 2> /dev/null sh: 0: getcwd() failed: No such file or directory [] Sending after command: echo 'Metasploit is located under /opt/ metasploit-framework/ but you can launch from anywhere by typing msfconsole etc.' > /pentest/exploitation/metasploit/ METASPLOIT_README.txt sh: 0: getcwd() failed: No such file or directory [] Sending after command: rm -rf /usr/local/bin/msf 1> /dev/null 2> /dev/null sh: 0: getcwd() failed: No such file or directory [] Completed running after commands routine.. [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/brutex [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/brutex Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: snmp 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 154 kB of archives. After this operation, 553 kB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 snmp amd64 5.7.3+dfsg-1ubuntu4 [154 kB] Fetched 154 kB in 1s (146 kB/s) N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension Selecting previously unselected package snmp. (Reading database ... 314154 files and directories currently installed.) Preparing to unpack .../snmp_5.7.3+dfsg-1ubuntu4_amd64.deb ... Unpacking snmp (5.7.3+dfsg-1ubuntu4) ... Processing triggers for man-db (2.7.5-1) ... Setting up snmp (5.7.3+dfsg-1ubuntu4) ... Updating BackBox console menu ... W: --force-yes is deprecated, use one of the options starting with -- allow instead. [] Pre-reqs for modules/exploitation/brutex have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/brutex/ [] Created automatic launcher, you can run the tool from anywhere by typing: brutex [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/badkeys [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/badkeys Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/badkeys have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/badkeys/ [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/yersinia [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/yersinia Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... libpcap0.8 is already the newest version (1.7.4-2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... libnet1 is already the newest version (1.1.6+dfsg-3). libnet1 set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/yersinia have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/yersinia/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/yersinia/ [] Sending after command: ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for makedepend... no checking if unaligned accesses fail... no checking for main in -lsocket... no checking for main in -lresolv... yes checking for main in -lnsl... yes checking for main in -lrt... yes checking for a complete set of pcap headers... more than one set found in: /usr/include /usr/include/pcap please wipe out all unused pcap installations [] Sending after command: make make: No targets specified and no makefile found. Stop. [] Sending after command: make install make: ** No rule to make target 'install'. Stop. [] Completed running after commands routine.. [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/commix [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/commix Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/commix have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/commix/ [] Created automatic launcher, you can run the tool from anywhere by typing: commix [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/birp [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/birp Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/birp have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/birp/ [] Running after commands for post installation requirements. The directory '/home/jay/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. The directory '/home/jay/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. Collecting py3270 Downloading py3270-0.3.3.zip Collecting colorama Downloading colorama-0.3.7-py2.py3-none-any.whl Collecting IPython Downloading ipython-5.1.0-py2-none-any.whl (747kB) 100% |████████████████████████████████| 747kB 313kB/s Requirement already satisfied (use --upgrade to upgrade): six in /usr/ lib/python2.7/dist-packages (from py3270) Collecting pickleshare (from IPython) Downloading pickleshare-0.7.4-py2.py3-none-any.whl Collecting prompt-toolkit<2.0.0,>=1.0.3 (from IPython) Downloading prompt_toolkit-1.0.9-py2-none-any.whl (241kB) 100% |████████████████████████████████| 245kB 445kB/s Collecting traitlets>=4.2 (from IPython) Downloading traitlets-4.3.1-py2.py3-none-any.whl (74kB) 100% |████████████████████████████████| 81kB 684kB/s Collecting backports.shutil-get-terminal-size; python_version == "2.7" (from IPython) Downloading backports.shutil_get_terminal_size-1.0.0-py2.py3-none- any.whl Requirement already satisfied (use --upgrade to upgrade): decorator in /usr/lib/python2.7/dist-packages (from IPython) Collecting pygments (from IPython) Downloading Pygments-2.1.3-py2.py3-none-any.whl (755kB) 100% |████████████████████████████████| 757kB 366kB/s Collecting simplegeneric>0.8 (from IPython) Downloading simplegeneric-0.8.1.zip Requirement already satisfied (use --upgrade to upgrade): pexpect; sys_platform != "win32" in /usr/lib/python2.7/dist-packages (from IPython) Collecting pathlib2; python_version == "2.7" or python_version == "3.3" (from IPython) Downloading pathlib2-2.1.0-py2.py3-none-any.whl Requirement already satisfied (use --upgrade to upgrade): setuptools>=18.5 in /usr/lib/python2.7/dist-packages (from IPython) Collecting wcwidth (from prompt-toolkit<2.0.0,>=1.0.3->IPython) Downloading wcwidth-0.1.7-py2.py3-none-any.whl Requirement already satisfied (use --upgrade to upgrade): enum34; python_version == "2.7" in /usr/lib/python2.7/dist-packages (from traitlets>=4.2->IPython) Collecting ipython-genutils (from traitlets>=4.2->IPython) Downloading ipython_genutils-0.1.0-py2.py3-none-any.whl Installing collected packages: py3270, colorama, pathlib2, pickleshare, wcwidth, prompt-toolkit, ipython-genutils, traitlets, backports.shutil-get-terminal-size, pygments, simplegeneric, IPython Running setup.py install for py3270 ... done Running setup.py install for simplegeneric ... done Successfully installed IPython-5.1.0 backports.shutil-get-terminal- size-1.0.0 colorama-0.3.7 ipython-genutils-0.1.0 pathlib2-2.1.0 pickleshare-0.7.4 prompt-toolkit-1.0.9 py3270-0.3.3 pygments-2.1.3 simplegeneric-0.8.1 traitlets-4.3.1 wcwidth-0.1.7 You are using pip version 8.1.1, however version 9.0.1 is available. You should consider upgrading via the 'pip install --upgrade pip' command. [] Completed running after commands routine.. [] Created automatic launcher, you can run the tool from anywhere by typing: birp [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/beef [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/beef Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). libsqlite3-dev is already the newest version (3.11.0-1ubuntu1). ruby-dev is already the newest version (1:2.3.0+1). sqlite3 is already the newest version (3.11.0-1ubuntu1). ruby2.3 is already the newest version (2.3.1-2~16.04). ruby2.3 set to manually installed. The following NEW packages will be installed: ruby-sqlite3 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 34.3 kB of archives. After this operation, 150 kB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu xenial/universe amd64 ruby- sqlite3 amd64 1.3.11-2build1 [34.3 kB] Fetched 34.3 kB in 0s (44.1 kB/s) N: Ignoring file '50unattended-upgrades.ucf-old' in directory '/etc/ apt/apt.conf.d/' as it has an invalid filename extension Selecting previously unselected package ruby-sqlite3. (Reading database ... 314210 files and directories currently installed.) Preparing to unpack .../ruby-sqlite3_1.3.11-2build1_amd64.deb ... Unpacking ruby-sqlite3 (1.3.11-2build1) ... Processing triggers for doc-base (0.10.7) ... Processing 1 added doc-base file... Registering documents with scrollkeeper... Setting up ruby-sqlite3 (1.3.11-2build1) ... Updating BackBox console menu ... W: --force-yes is deprecated, use one of the options starting with -- allow instead. [] Pre-reqs for modules/exploitation/beef have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/beef/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/beef/ [] Sending after command: gem install bundler Fetching: bundler-1.13.6.gem (100%) Successfully installed bundler-1.13.6 Parsing documentation for bundler-1.13.6 Installing ri documentation for bundler-1.13.6 Done installing documentation for bundler after 3 seconds 1 gem installed [] Sending after command: bundle install Don't run Bundler as root. Bundler can ask for sudo if it is needed, and installing your bundle as root will break this application for all non-root users on this machine. Fetching gem metadata from https://rubygems.org/........... Fetching version metadata from https://rubygems.org/... Fetching dependency metadata from https://rubygems.org/.. Installing addressable 2.4.0 Installing ansi 1.5.0 Installing chunky_png 1.3.5 Installing daemons 1.2.3 Installing fastercsv 1.5.5 Using json 1.8.3 Installing json_pure 1.8.3 Installing multi_json 1.11.3 Installing eventmachine 1.0.9.1 with native extensions Installing http_parser.rb 0.6.0 with native extensions Installing erubis 2.7.0 Installing espeak-ruby 1.0.3 Installing execjs 2.6.0 Installing geoip 1.6.1 Installing librex 0.0.999 Installing libv8 3.11.8.17 Installing mime-types-data 3.2016.0221 Installing mojo_magick 0.5.6 Installing msgpack 0.5.12 with native extensions Installing parseconfig 1.0.8 Installing rack 1.6.4 Installing rainbow 2.1.0 Installing ref 2.0.0 Installing rubyzip 1.2.0 Installing tilt 2.0.2 Installing tins 1.10.1 Using bundler 1.13.6 Installing data_objects 0.10.17 Installing dm-core 1.2.1 Installing rqrcode 0.10.1 Installing em-websocket 0.5.1 Installing uglifier 3.0.0 Installing mime-types 3.0 Installing msfrpc-client 1.0.3 Installing rack-protection 1.5.3 Installing thin 1.6.4 with native extensions Installing rexec 1.6.3 Installing therubyracer 0.11.3 with native extensions Installing term-ansicolor 1.3.2 Installing do_sqlite3 0.10.17 with native extensions Installing dm-do-adapter 1.2.0 Installing dm-migrations 1.2.0 Installing dm-serializer 1.2.2 Installing qr4r 0.4.1 Installing sinatra 1.4.7 Installing rubydns 0.7.3 Installing dm-sqlite-adapter 1.2.0 Bundle complete! 25 Gemfile dependencies, 47 gems now installed. Use
bundle show [gemname]to see where a bundled gem is installed. Post-install message from mojo_magick: Thanks for installing MojoMagick - keepin it simple! To make this gem work, you need a few binaries! Make sure you've got ImageMagick available. http://imagemagick.org If you plan to build images with text (using the "label" method) you'll need freetype and ghostscript as well. Check out http://www.freetype.org and http://ghostscript.com respectively for installation info. [] Completed running after commands routine.. [] Created automatic launcher, you can run the tool from anywhere by typing: beef [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/ettercap [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/ettercap Reading package lists... Building dependency tree... Reading state information... bison is already the newest version (2:3.0.4.dfsg-1). libltdl-dev is already the newest version (2.4.6-0.1). libltdl-dev set to manually installed. libncurses5-dev is already the newest version (6.0+20160213-1ubuntu1). libpcap-dev is already the newest version (1.7.4-2). ghostscript is already the newest version (9.18~dfsg~0-0ubuntu2.3). libcurl4-openssl-dev is already the newest version (7.47.0-1ubuntu2.2). libssl-dev is already the newest version (1.0.2g-1ubuntu4.5). cmake is already the newest version (3.5.1-1ubuntu3). Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libgtk2.0-dev : Depends: libgtk2.0-0 (= 2.24.30-1ubuntu1) but 2.24.30-1ubuntu1.16.04.1 is to be installed E: Unable to correct problems, you have held broken packages. [] Pre-reqs for modules/exploitation/ettercap have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/ettercap/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/ettercap/ [] Sending after command: mkdir build [] Sending after command: cd build [] Sending after command: cmake ../ CMake Error: The source directory "/home/jay/Downloads/ptf-master" does not appear to contain CMakeLists.txt. Specify --help for usage, or press the help button on the CMake GUI. [*] Sending after command: make make: * No targets specified and no makefile found. Stop. [] Sending after command: make install make: No rule to make target 'install'. Stop. [] Completed running after commands routine.. [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/burp [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/burp Reading package lists... Building dependency tree... Reading state information... default-jre is already the newest version (2:1.8-56ubuntu2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/burp have been installed. [] Making the appropriate directory structure first [] FILE was the selected method for installation... Using curl -o to install. [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/burp/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/burp/ [] Sending after command: echo #!/bin/sh > burp.sh [] Sending after command: echo java -jar burp.jar >> burp.sh [] Sending after command: chmod +x burp.sh [] Sending after command: mv DownloadUpdate.ashx?Product=Free burp.jar [] Completed running after commands routine.. [] Created automatic launcher, you can run the tool from anywhere by typing: burp [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/jexboss [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/jexboss Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). python-pip is already the newest version (8.1.1-2ubuntu0.4). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/jexboss have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/jexboss/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/jexboss/ [] Sending after command: pip install -r requires.txt The directory '/home/jay/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. The directory '/home/jay/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. Requirement already satisfied (use --upgrade to upgrade): urllib3>=1.8 in /usr/lib/python2.7/dist-packages (from -r requires.txt (line 1)) Requirement already satisfied (use --upgrade to upgrade): ipaddress in /usr/lib/python2.7/dist-packages (from -r requires.txt (line 2)) You are using pip version 8.1.1, however version 9.0.1 is available. You should consider upgrading via the 'pip install --upgrade pip' command. [] Completed running after commands routine.. [] Running updatedb to tidy everything up. [] Installing and/or updating: modules/exploitation/routersploit [] Tool not installed yet, will run through install routine [] Preparing dependencies for module: modules/exploitation/ routersploit Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.7.4-0ubuntu1). libncurses5-dev is already the newest version (6.0+20160213-1ubuntu1). python-dev is already the newest version (2.7.11-1). python-pip is already the newest version (8.1.1-2ubuntu0.4). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [] Pre-reqs for modules/exploitation/routersploit have been installed. [] Making the appropriate directory structure first [] GIT was the selected method for installation... Using GIT to install. [] Installing now.. be patient... [] Finished Installing! Enjoy the tool located under: /pentest/ exploitation/routersploit/ [] Running after commands for post installation requirements. [] Sending after command: cd /pentest/exploitation/routersploit/ [] Sending after command: pip install -r requirements.txt The directory '/home/jay/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. The directory '/home/jay/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag. Requirement already satisfied (use --upgrade to upgrade): requests>=2.9.1 in /usr/lib/python2.7/dist-packages (from -r requirements.txt (line 1)) Requirement already satisfied (use --upgrade to upgrade): paramiko>=1.16.0 in /usr/lib/python2.7/dist-packages (from -r requirements.txt (line 2)) Requirement already satisfied (use --upgrade to upgrade): beautifulsoup4>=4.4.1 in /usr/lib/python2.7/dist-packages (from -r requirements.txt (line 3)) Collecting pysnmp>=4.3.2 (from -r requirements.txt (line 4)) Downloading pysnmp-4.3.2-py2.py3-none-any.whl (254kB) 100% |████████████████████████████████| 256kB 3.8MB/s Collecting gnureadline>=6.3.3 (from -r requirements.txt (line 5)) Downloading gnureadline-6.3.3.tar.gz (2.5MB) 100% |████████████████████████████████| 2.5MB 779kB/s Requirement already satisfied (use --upgrade to upgrade): pycrypto>=2.4.1 in /usr/lib/python2.7/dist-packages (from pysnmp>=4.3.2->-r requirements.txt (line 4)) Collecting pysmi (from pysnmp>=4.3.2->-r requirements.txt (line 4)) Downloading pysmi-0.0.7-py2.py3-none-any.whl (62kB) 100% |████████████████████████████████| 71kB 9.7MB/s Requirement already satisfied (use --upgrade to upgrade): pyasn1>=0.1.8 in /usr/lib/python2.7/dist-packages (from pysnmp>=4.3.2-