search

tschak909 / platotermamiga

PLATOTerm for the Commodore-Amiga
GNU General Public License v3.0
8 stars 4 forks source link

Feature request: prism2.device support #33

Open ghost opened 5 years ago

ghost commented 5 years ago

I'd love to do some testing on this on prism2.device http://aminet.net/package/driver/net/prism2v2. It's a driver for many PCMCIA wireless cards for Amiga such as this one: https://retroready.one/collections/internet-networking/products/wifi-cards-netgear-wpa2-aes-amiga-a600-a1200-pcmcia-wifi-wlan?variant=12700646932550

The terminal for Amiga has a facility to change serial device, but throws an error/exception when prism2.device is entered.

No expectation, just a request. Thanks for supporting the platform.

tschak909 commented 5 years ago

I assume it's a SANA-II driver, so you'll need to install telser.device, and use it, like I do: http://aminet.net/search?query=telser

Get telser + keyfile, and you're good to go.

Once installed, run tsconfig, make a host entry and be sure to turn on raw mode, and you'll be good to go.

-Thom

On Fri, Jun 21, 2019 at 2:49 PM TLF notifications@github.com wrote:

I'd love to do some testing on this on prism2.device http://aminet.net/package/driver/net/prism2v2. It's a driver for many PCMCIA wireless cards for Amiga such as this one: https://retroready.one/collections/internet-networking/products/wifi-cards-netgear-wpa2-aes-amiga-a600-a1200-pcmcia-wifi-wlan?variant=12700646932550

The terminal for Amiga has a facility to change serial device, but throws an error/exception when prism2.device is entered.

No expectation, just a request. Thanks for supporting the platform.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZXVPMLECGFNWQX3ZXLP3UWDRA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4G3BDENQ, or mute the thread https://github.com/notifications/unsubscribe-auth/AAVBYZW56NMBYUETHMSFYSDP3UWDRANCNFSM4H2UM3NA .

ghost commented 5 years ago

Very interesting, I was looking for some kind of proxy type thing like this but couldn’t find it. The Telser installer is asking me which “networking package you run" among AmiTCP, AS225 R2, I-Net 225 and MultiLink. Since I’m using Roadshow, I’ll need to understand Telser better to learn how to configure it to use Roadshow instead of these. I’ll be back that’s done.

On 22 Meith 2019, at 01:22, Thomas Cherryhomes notifications@github.com wrote:

I assume it's a SANA-II driver, so you'll need to install telser.device, and use it, like I do: http://aminet.net/search?query=telser

Get telser + keyfile, and you're good to go.

Once installed, run tsconfig, make a host entry and be sure to turn on raw mode, and you'll be good to go.

-Thom

On Fri, Jun 21, 2019 at 2:49 PM TLF notifications@github.com wrote:

I'd love to do some testing on this on prism2.device http://aminet.net/package/driver/net/prism2v2. It's a driver for many PCMCIA wireless cards for Amiga such as this one: https://retroready.one/collections/internet-networking/products/wifi-cards-netgear-wpa2-aes-amiga-a600-a1200-pcmcia-wifi-wlan?variant=12700646932550

The terminal for Amiga has a facility to change serial device, but throws an error/exception when prism2.device is entered.

No expectation, just a request. Thanks for supporting the platform.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZXVPMLECGFNWQX3ZXLP3UWDRA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4G3BDENQ, or mute the thread https://github.com/notifications/unsubscribe-auth/AAVBYZW56NMBYUETHMSFYSDP3UWDRANCNFSM4H2UM3NA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AANNESFSGAYHEOVAFN3NFVDP3VWEPA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYJ3YHI#issuecomment-504609821, or mute the thread https://github.com/notifications/unsubscribe-auth/AANNESE6D2OONESOIY4XMDLP3VWEPANCNFSM4H2UM3NA.

tschak909 commented 5 years ago

In that case, AmiTCP should be sufficient. You may need to set some assigns, but as far as I know, RoadShow is AmiTCP compatible.

-Thom

-Thom

On Sat, Jun 22, 2019 at 2:05 PM TLF notifications@github.com wrote:

Very interesting, I was looking for some kind of proxy type thing like this but couldn’t find it. The Telser installer is asking me which “networking package you run" among AmiTCP, AS225 R2, I-Net 225 and MultiLink. Since I’m using Roadshow, I’ll need to understand Telser better to learn how to configure it to use Roadshow instead of these. I’ll be back that’s done.

On 22 Meith 2019, at 01:22, Thomas Cherryhomes notifications@github.com wrote:

I assume it's a SANA-II driver, so you'll need to install telser.device, and use it, like I do: http://aminet.net/search?query=telser

Get telser + keyfile, and you're good to go.

Once installed, run tsconfig, make a host entry and be sure to turn on raw mode, and you'll be good to go.

-Thom

On Fri, Jun 21, 2019 at 2:49 PM TLF notifications@github.com wrote:

I'd love to do some testing on this on prism2.device http://aminet.net/package/driver/net/prism2v2. It's a driver for many PCMCIA wireless cards for Amiga such as this one:

https://retroready.one/collections/internet-networking/products/wifi-cards-netgear-wpa2-aes-amiga-a600-a1200-pcmcia-wifi-wlan?variant=12700646932550

The terminal for Amiga has a facility to change serial device, but throws an error/exception when prism2.device is entered.

No expectation, just a request. Thanks for supporting the platform.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZXVPMLECGFNWQX3ZXLP3UWDRA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4G3BDENQ , or mute the thread < https://github.com/notifications/unsubscribe-auth/AAVBYZW56NMBYUETHMSFYSDP3UWDRANCNFSM4H2UM3NA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AANNESFSGAYHEOVAFN3NFVDP3VWEPA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYJ3YHI#issuecomment-504609821>, or mute the thread < https://github.com/notifications/unsubscribe-auth/AANNESE6D2OONESOIY4XMDLP3VWEPANCNFSM4H2UM3NA .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZT2VYUUJSEU3QUMGF3P3ZZV5A5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKPRJA#issuecomment-504690852, or mute the thread https://github.com/notifications/unsubscribe-auth/AAVBYZU7DN23ZB76HAJ7IETP3ZZV5ANCNFSM4H2UM3NA .

ghost commented 5 years ago

Looks like you’re right: "Roadshow is compatible with the vast majority of Amiga networking programs which use the AmiTCP program interface, such as OWB, IBrowse …” (from http://roadshow.apc-tcp.de/index-en.php http://roadshow.apc-tcp.de/index-en.php). I’ll get to it ASAP.

On 22 Meith 2019, at 22:13, Thomas Cherryhomes notifications@github.com wrote:

In that case, AmiTCP should be sufficient. You may need to set some assigns, but as far as I know, RoadShow is AmiTCP compatible.

-Thom

-Thom

On Sat, Jun 22, 2019 at 2:05 PM TLF notifications@github.com wrote:

Very interesting, I was looking for some kind of proxy type thing like this but couldn’t find it. The Telser installer is asking me which “networking package you run" among AmiTCP, AS225 R2, I-Net 225 and MultiLink. Since I’m using Roadshow, I’ll need to understand Telser better to learn how to configure it to use Roadshow instead of these. I’ll be back that’s done.

On 22 Meith 2019, at 01:22, Thomas Cherryhomes notifications@github.com wrote:

I assume it's a SANA-II driver, so you'll need to install telser.device, and use it, like I do: http://aminet.net/search?query=telser

Get telser + keyfile, and you're good to go.

Once installed, run tsconfig, make a host entry and be sure to turn on raw mode, and you'll be good to go.

-Thom

On Fri, Jun 21, 2019 at 2:49 PM TLF notifications@github.com wrote:

I'd love to do some testing on this on prism2.device http://aminet.net/package/driver/net/prism2v2. It's a driver for many PCMCIA wireless cards for Amiga such as this one:

https://retroready.one/collections/internet-networking/products/wifi-cards-netgear-wpa2-aes-amiga-a600-a1200-pcmcia-wifi-wlan?variant=12700646932550

The terminal for Amiga has a facility to change serial device, but throws an error/exception when prism2.device is entered.

No expectation, just a request. Thanks for supporting the platform.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZXVPMLECGFNWQX3ZXLP3UWDRA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4G3BDENQ , or mute the thread < https://github.com/notifications/unsubscribe-auth/AAVBYZW56NMBYUETHMSFYSDP3UWDRANCNFSM4H2UM3NA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AANNESFSGAYHEOVAFN3NFVDP3VWEPA5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYJ3YHI#issuecomment-504609821>, or mute the thread < https://github.com/notifications/unsubscribe-auth/AANNESE6D2OONESOIY4XMDLP3VWEPANCNFSM4H2UM3NA .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AAVBYZT2VYUUJSEU3QUMGF3P3ZZV5A5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKPRJA#issuecomment-504690852, or mute the thread https://github.com/notifications/unsubscribe-auth/AAVBYZU7DN23ZB76HAJ7IETP3ZZV5ANCNFSM4H2UM3NA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermamiga/issues/33?email_source=notifications&email_token=AANNESBTOSNTKNFUIJ7Y33TP32IX7A5CNFSM4H2UM3NKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKROXQ#issuecomment-504698718, or mute the thread https://github.com/notifications/unsubscribe-auth/AANNESF5UV2LBBLLUQAHT4LP32IX7ANCNFSM4H2UM3NA.