search

tschak909 / platotermzx

PLATOTerm for ZX Spectrum and Amstrad CPC (and other Z80 systems)
23 stars 10 forks source link

Platoterm on the Spectrum Next #9

Open simulant-systems opened 4 years ago

simulant-systems commented 4 years ago

Hi I just wondered if you could release a version that you can set the baud on or runs at 115200 so it can be used on the Spectrum Next please?

Thanks for any help

tschak909 commented 4 years ago

Hi. will need to do some digging into the RS232 routines to see what I would need to add to them to do that. I'm using z88dk's RS232 routines as is (almost) -Thom

On Sun, Apr 12, 2020 at 10:40 AM Simulant notifications@github.com wrote:

Hi I just wondered if you could release a version that you can set the baud on or runs at 115200 so it can be used on the Spectrum Next please?

Thanks for any help

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/tschak909/platotermzx/issues/9, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAVBYZVWRRNC3UTUML5NQY3RMHOIVANCNFSM4MGOT64Q .

simulant-systems commented 4 years ago

Hi thanks that would be fantastic. I run a humble Amstrad BBS which also has Spectrum boards and chat rooms etc on there, so it would be fantastic as a Spectrum Next owner to be able to connect to the BBS on the Spectrum and use the BBS :)

BBS info is here: http://amstrad.simulant.uk

tschak909 commented 4 years ago

PLATOTERM is a terminal program specifically for PLATO hosts. It is not a standard terminal program. Please watch the demo videos.

simulant-systems commented 4 years ago

Sorry for the misunderstanding - are there any plans to add other terminal emulator modes for standard BBS 1200/1200 baud ascii/ansi etc? Thanks again

simulant-systems commented 4 years ago

Hi again a user on the Spectrum boards of my Amstrad BBS has just informed me about SnapCTerm https://github.com/thweasel/snapCterm which he says works well for ANSI BBS users. I'll post there also just to ask if they may be willing to add the Spectrum Next wifi esp as an option for connecting with SnapCTerm. Thanks again.