search

tsunghanliu / adsb-box.snap

a snap to build a ADS-B receiver station
28 stars 4 forks source link

TAR1090 installation #37

Closed LuSou closed 3 years ago

LuSou commented 3 years ago

I would like to install wiedehopf/tar1090 as this one is better than Piaware. How to install when dump1090 ... are under snap ?

tsunghanliu commented 3 years ago

It's not possible to change the snap or install additional applications over it. If you are not using Ubuntu Core, you can disable the dump1090 service, install wiedehopf/tar1090 and configure tar1090 to output BEAST format data to port 30005.

LuSou commented 3 years ago

Thks for your Re: Lubor

From: Tsunghan Liu (Robert Liu) notifications@github.com Sent: Wednesday, February 17, 2021 4:53 PM To: tsunghanliu/adsb-box.snap adsb-box.snap@noreply.github.com Cc: Lubor Souček lubor@soucek.cz; Author author@noreply.github.com Subject: Re: [tsunghanliu/adsb-box.snap] TAR1090 installation (#37)

It's not possible to change the snap or install additional applications over it. If you are not using Ubuntu Core, you can disable the dump1090 service, install wiedehopf/tar1090 and configure tar1090 to output BEAST format data to port 30005.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/tsunghanliu/adsb-box.snap/issues/37#issuecomment-780654099, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASKZRGJGEL2XRBXKYZCVV3LS7PQ7DANCNFSM4XYBHR5Q.