Open dlasher opened 1 year ago
hmmmm..
oot@adsb-box:/snap/adsb-box/758/usr/bin# dump978-fa --sdr driver=rtlsdr,serial=00000978 --format CS8 --raw-port 30978 --json-port 30979
raw-port: listening for connections on 0.0.0.0:30978
raw-port: listening for connections on [::]:30978
json-port: listening for connections on 0.0.0.0:30979
json-port: listening for connections on [::]:30979
Configuration error: No matching SoapySDR device found (cause: SoapySDR::Device::make() no match)
Hi @dlasher ,
To get the log, you can use sudo snap logs -n all adsb-box.dump978
.
Also, could you please check if you have followed the instructions in README[1] to enable the dump978 service?
If you want to run dump978 manually, you need add SOAPY_SDR_PLUGIN_PATH
to the environment variables. See the wrapper[2] for the details.
[1] https://github.com/tsunghanliu/adsb-box.snap#uat978-settings [2] https://github.com/tsunghanliu/adsb-box.snap/blob/master/bin/dump978#L89
Got a much more powerful box to run adsb on, did a fresh OS install, installed the snap, copied the config over, and everything started perfectly..... (Running on an oDroid N2+ (Linux adsb-box 6.1.11-meson64 #23.02.2 SMP PREEMPT Sat Feb 18 00:07:55 UTC 2023 aarch64 GNU/Linux)
but I didn't notice the 978 parts weren't running. So troubleshooting that tonight, and can't get it happy.
Running the latest/edge versions:
Figured I'd poke around, make sure the serials were set right, etc, appears to be. All the 1090 stuff is working fine, dump978-fa isn't running, even after reboot. Sees both tuner cards.
Starting dump978 from within the snap works
Where do I need to look for logs?