tteck
commented
1 week ago 🏁 The script runs without any problems from this end.
__ __
/ / / /___ ____ ___ ____ ___________
/ /_/ / __ \/ __ `__ \/ __ `/ ___/ ___/
/ __ / /_/ / / / / / / /_/ / / / /
/_/ /_/\____/_/ /_/ /_/\__,_/_/ /_/
Using Advanced Settings
Using Distribution: debian
Using debian Version: 12
Using Container Type: 1
Using Root Password: Automatic Login
Container ID: 112
Using Hostname: homarr
Using Disk Size: 8
Allocated Cores: 2
Allocated RAM: 2048
Using Bridge: vmbr0
Using IP Address: dhcp
Using Gateway IP Address: Default
Using APT-Cacher IP Address: Default
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using MAC Address: AE:1A:60:07:B7:59
Using Vlan: Default
Enable Root SSH Access: no
Enable Verbose Mode: no
Creating a Homarr LXC using the above advanced settings
✓ Using local for Template Storage.
✓ Using thin-pool for Container Storage.
✓ Updated LXC Template List
✓ LXC Container 112 was successfully created.
✓ Started LXC Container
✓ Set up Container OS
✓ Network Connected: 192.168.86.250
✓ IPv4 Internet Connected
✗ IPv6 Internet Not Connected
✓ DNS Resolved github.com to 140.82.113.3
✓ Updated Container OS
✓ Installed Dependencies
✓ Set up Node.js Repository
✓ Installed Node.js/Yarn
✓ Installed Homarr
✓ Created Service
✓ Customized Container
✓ Cleaned
✓ Completed Successfully!
Homarr should be reachable by going to the following URL.
http://192.168.86.250:3000 
soultaco83
Please verify that you have read and understood the guidelines.
yes
A clear and concise description of the issue.
When using the homarr LXC install script the install is failing. The container is created but the install of the Homarr application into the created container is not completed.
What settings are you currently utilizing?
Default Settings
Which Linux distribution are you employing?
Debian 12
If relevant, including screenshots or a code block can be helpful in clarifying the issue.
✓ Installed Node.js/Yarn
[ERROR] in line 23: exit code 0: while executing command "$@" > /dev/null 2>&1 The silent function has suppressed the error, run the script with verbose mode enabled, which will provide more detailed output.
--verbose
Please provide detailed steps to reproduce the issue.
run: bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homarr.sh)" select default settings Wait for install to be attempted