tteck
commented
2 months ago 🏁 The script runs without any problems from this end.
____ __ __ ___ ___ _____
/ __ \/ /__ _ __ / |/ /__ ____/ (_)___ _ / ___/___ ______ _____ _____
/ /_/ / / _ \| |/_/ / /|_/ / _ \/ __ / / __ `/ \__ \/ _ \/ ___/ | / / _ \/ ___/
/ ____/ / __/> < / / / / __/ /_/ / / /_/ / ___/ / __/ / | |/ / __/ /
/_/ /_/\___/_/|_| /_/ /_/\___/\__,_/_/\__,_/ /____/\___/_/ |___/\___/_/
Using Advanced Settings
Using Distribution: ubuntu
Using ubuntu Version: 22.04
Using Container Type: 1
Using Root Password: Automatic Login
Container ID: 111
Using Hostname: plex
Using Disk Size: 8
Allocated Cores: 2
Allocated RAM: 2048
Using Bridge: vmbr0
Using IP Address: dhcp
Using Gateway IP Address: Default
Using APT-Cacher IP Address: Default
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using MAC Address: AE:1A:60:07:B7:59
Using Vlan: Default
Enable Root SSH Access: no
Enable Verbose Mode: no
Creating a Plex LXC using the above advanced settings
✓ Using local for Template Storage.
✓ Using thin-pool for Container Storage.
✓ Updated LXC Template List
✓ LXC Container 111 was successfully created.
✓ Started LXC Container
✓ Set up Container OS
✓ Network Connected: 192.168.86.250
✓ IPv4 Internet Connected
✗ IPv6 Internet Not Connected
✓ DNS Resolved github.com to 140.82.112.4
✓ Updated Container OS
✓ Installed Dependencies
✓ Set Up Hardware Acceleration
✓ Set Up Plex Media Server Repository
✓ Installed Plex Media Server
✓ Customized Container
✓ Cleaned
✓ Completed Successfully!
Plex should be reachable by going to the following URL.
http://192.168.86.250:32400/web
______ _ __ __
/_ __/___ _(_) /_____________ _/ /__
/ / / __ `/ / / ___/ ___/ __ `/ / _ \
/ / / /_/ / / (__ ) /__/ /_/ / / __/
/_/ \__,_/_/_/____/\___/\__,_/_/\___/
Installing Tailscale...
✔ Installed Tailscale
Reboot 111 LXC to apply the changes, then run tailscale up in the LXC console
Please verify that you have read and understood the guidelines.
yes
A clear and concise description of the issue.
I found quite similar issue #2591, but there are nothing to learn how to fix it. I tried to add tailscale to LXC created by another helper scripts: plex and turnkey samba server. Please help 😅
What settings are you currently utilizing?
Default Settings
Which Linux distribution are you employing?
Ubuntu 22.04
If relevant, including screenshots or a code block can be helpful in clarifying the issue.
Please provide detailed steps to reproduce the issue.