frigate install problem

[Sysoev86]

Please verify that you have read and understood the guidelines.

yes

A clear and concise description of the issue.

______     _             __

/ /(_)_ ___ / /____ / / / _/ / `/ `/ _/ \ / / / / / / // / // / /_/ / // // //_, /_,/_/\/ /____/

Using Advanced Settings Using Distribution: debian Using debian Version: 12 Using Container Type: 0 Using Root Password: **** Container ID: 126 Using Hostname: frigate Using Disk Size: 20 Allocated Cores: 4 Allocated RAM: 4096 Using Bridge: vmbr100 Using IP Address: 192.168.100.126/24 Using Gateway IP Address: 192.168.100.1 Using APT-Cacher IP Address: Default Disable IPv6: yes Using Interface MTU Size: Default Using DNS Search Domain: Host Using DNS Server IP Address: Host Using Vlan: Default Enable Root SSH Access: yes Enable Verbose Mode: no Creating a Frigate LXC using the above advanced settings ✓ Using local for Template Storage. ✓ Using local-lvm for Container Storage. ✓ Updated LXC Template List ✓ LXC Container 126 was successfully created. ✓ Started LXC Container ✓ Set up Container OS ✓ Network Connected: 192.168.100.126 ✓ IPv4 Internet Connected ✗ IPv6 Internet Not Connected ✓ DNS Resolved github.com to 2a06:98c1:3121::1 2a06:98c1:3120::1 ✓ Updated Container OS | Installing Dependencies (Patience)
[ERROR] in line 23: exit code 0: while executing command "$@" > /dev/null 2>&1 The silent function has suppressed the error, run the script with verbose mode enabled, which will provide more detailed output.

What settings are you currently utilizing?

Advanced Settings

Which Linux distribution are you employing?

Debian 12

If relevant, including screenshots or a code block can be helpful in clarifying the issue.

Please provide detailed steps to reproduce the issue.

No response

[tteck]

🛑 Failure to comply with the following guideline.

• If the default Linux distribution is not adhered to, script support will be discontinued.