ttn-zh / ic880a-gateway

Reference setup for iC880a gateways running The Things Network
GNU General Public License v3.0
456 stars 210 forks source link

can't connect without any failure #40

Closed elBeato closed 6 years ago

elBeato commented 6 years ago

Hi there, I've tried every thing what i found on google...but I'can't connect to the ttn network. this is my status and syslog: ttn@ttn-gateway:~ $ service ttn-gateway status

SPI is enable. Power supply is original from RPI (V2.0) I connect the IC880a with the backplane and an raspberry pi 2.0 Version B

Could anybody help me? kindly regards Elbeato

elBeato commented 6 years ago

oh...I've already found out, that I use a RPI 1 Model B+ V1.2, I think, this could be the problem??

gonzalocasas commented 6 years ago

@elBeato judging by the log, the gateway is connected, maybe you didn't register it correctly on the TTN console, but the gateway seems funcional. If you agree, I will close this.

elBeato commented 6 years ago

Thank you for checking the log file! ok, you can close this, but the Gateway doesn't show as connected in the console. I've done a correctly registration on the TTN console. I will try it today with the RPI 3...

gonzalocasas commented 6 years ago

@elBeato ok, the first thing to check after installation would be that messages from a node are actually being forwarded. If that works, then the problem is definitely only a registration issue, in which case I would suggest to post it on the forum or on TTN's Slack. If messages are not forwarded, then maybe re-open it, adding the new, full log and any additional info that could help diagnose it.