I've try to upgrade from version 0.2.3-20191008 to latest release 0.8.0-20200620, but it was not successful.
dfu-util -d 0483:df11 -a 0 -s 0x08000000:leave -D build/ch.bin
dfu-util 0.11
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
dfu-util: Warning: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release
Opening DFU capable USB device...
Device ID 0483:df11
Device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Interface #0 ...
Determining device status...
DFU state(10) = dfuERROR, status(10) = Device's firmware is corrupt. It cannot return to run-time (non-DFU) operations
Clearing status
Determining device status...
DFU state(2) = dfuIDLE, status(0) = No error condition is present
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading element to address = 0x08000000, size = 82156
Erase [ ] 0% 0 bytes
I've wait a long time, but nothing happened. So I've power off the device, and try to reconnect. When I power on the device, I see just white screen and nothing more. My Linux Fedora 33 don't see the device - there is no any reaction to connect or disconnect USB.
Hi!
I've try to upgrade from version 0.2.3-20191008 to latest release 0.8.0-20200620, but it was not successful.
I've wait a long time, but nothing happened. So I've power off the device, and try to reconnect. When I power on the device, I see just white screen and nothing more. My Linux Fedora 33 don't see the device - there is no any reaction to connect or disconnect USB.
What should I do to restore?