search

tube0013 / tube_gateways

Information and Documentation on Tube's Zigbee Gateways
270 stars 51 forks source link

it's possible to flash TubesZB CC2652 Ethernet/USB Coordiniator with router firmware ? #113

Closed mcarbonneaux closed 1 year ago

mcarbonneaux commented 1 year ago

at step:

i can use router version in place ? like :

and with what version ? :

tube0013 commented 1 year ago

Yes. Note the Ethernet will okay no role in extending the zigbee networks

You use the launchpad variant or the build I use on the routers:

https://github.com/tube0013/tube_gateways/tree/main/models/current/tubeszb-router/firmware

mcarbonneaux commented 1 year ago

no problem with the ethernet, i understand.

when i see your modification, i see that the Koenkk version not set the emit power to 9 db ?!

i can use your last date version : tubeszb_router_20221002.hex.zip ?

tube0013 commented 1 year ago

no problem with the ethernet, i understand

Only stated as it's often misunderstood.

Yes on the version. Been shipping routers with that version for a while.

mcarbonneaux commented 1 year ago

if i whant tu reuse in coordinator mode i juste need to reflash with coordinator firmware ?

tube0013 commented 1 year ago

Yes, going back is the same process.

mcarbonneaux commented 1 year ago

ok cool! for the moment my need is more router than additional coordinator.

mcarbonneaux commented 1 year ago

it's possible to build 20db version of the router or is counter productive ?

tube0013 commented 1 year ago

You may want to look at the dev version of the router in the z-stack repo, it has adjustable tx strength.

Will it be able to hear everything that hears it?

mcarbonneaux commented 1 year ago

i've adjusted my usb coordinator based on CC2652P (sonof) to 15db (it's configurable in zigbee2mqtt) but it's emission power not receive power, and if router as the power emission positionned to 15db too i'm abel to make bridge between too long distance part of my home.

mcarbonneaux commented 1 year ago

it's work fine as router !

what is the sequence to force reapairing ?

tube0013 commented 1 year ago

momentarily press the BSL button either with esphome through the web dash board or with the physical button on the coordinator.