I attempted to update to the 20221226 release of the ZStack firmware but my device (CC2652P2 POE) is in a weird state now. I think it is stuck in bootloader mode because even after power cycling the device I am still able to update the firmware with cc-bsl.
$ cc2538-bsl.py -V -p socket://zigbee_gateway.local:6638 -evw ~/Downloads/CC1352P2_CC2652P_launchpad_coordinator_20221226.hex
Opening port socket://zigbee_gateway.local:6638, baud 500000
Reading data from /home/jspence2/Downloads/CC1352P2_CC2652P_launchpad_coordinator_20221226.hex
Firmware file: Raw Binary
Connecting to target...
*** sending synch sequence
Got 0 additional bytes before ACK/NACK
*** GetChipId command (0x28)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
Version 0x3202F000
Unrecognized chip ID. Trying CC13xx/CC26xx
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Mem Read (0x2A)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
CC1350 PG2.0 (7x7mm): 352KB Flash, 20KB SRAM, CCFG.BL_CONFIG at 0x00057FD8
Primary IEEE Address: 00:12:4B:00:23:7B:9B:C8
Performing mass erase
Erasing all main bank flash sectors
*** Bank Erase command(0x2C)
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
Erase done
Writing 8816 bytes starting at address 0x00000000
*** Download command (0x21)
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000000
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000000F8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000001F0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000002E8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000003E0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000004D8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000005D0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000006C8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000007C0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000008B8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000009B0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000AA8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000BA0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000C98
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000D90
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000E88
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00000F80
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001078
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001170
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001268
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001360
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001458
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001550
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001648
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001740
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001838
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001930
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001A28
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001B20
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001C18
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001D10
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001E08
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001F00
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x00001FF8
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)0x000020F0
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
Write 136 bytes at 0x000021E8
*** Download command (0x21)
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
*** Send Data (0x24)
Got 0 additional bytes before ACK/NACK
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
Write done
Verifying by comparing CRC32 calculations.
*** CRC32 command(0x27)
Got 0 additional bytes before ACK/NACK
*** received 6 bytes
*** GetStatus command (0x23)
Got 0 additional bytes before ACK/NACK
*** received 3 bytes
Command Successful
Verified (match: 0x12a8adf2)
*** Reset command (0x25)
Got 0 additional bytes before ACK/NACK
Attempting to start Zigbee2MQTT gives the following error:
error 2023-01-31 18:46:19: Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
at ZStackAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:103:27)
at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
at Zigbee.start (/app/lib/zigbee.ts:58:27)
at Controller.start (/app/lib/controller.ts:101:27)
at start (/app/index.js:107:5)
I attempted to update to the 20221226 release of the ZStack firmware but my device (CC2652P2 POE) is in a weird state now. I think it is stuck in bootloader mode because even after power cycling the device I am still able to update the firmware with
cc-bsl
.Attempting to start Zigbee2MQTT gives the following error: