search

tube0013 / tube_gateways

Information and Documentation on Tube's Zigbee Gateways
272 stars 51 forks source link

Z-Wave Adapter product page shows incorrect assembly #203

Open mag1024 opened 3 months ago

mag1024 commented 3 months ago

Hi -- I just received my order of the "Raspberry Pi GPIO to Olimex UEXT for Z-Wave Adaptors", assembled it, and it doesn't work -- Z-Wave JS cannot connect. I believe it may be because the image on the product page, which I followed as my assembly guide, is backwards --the pins are inserted from the wrong side. image

tube0013 commented 3 months ago

Apologies for the incorrect photo.

I can send a replacement se pre-soldered if you'd like. Please let me know over email store@tubeszb.com

Thanks.

Dinth commented 3 months ago

Hi. I think i have just done the same. No problem with resoldering it myself (i hope that the neither esp board nor razberry got damaged), but how exactly should it be soldered?

tube0013 commented 3 months ago

I removed the incorrect picture. The pins are labeled on the board, this cropped photos from the full kit shows the correct orientation:

Z-Wave PoE Kit https://tubeszb.com/product/z-wave-poe-kit/

image

The keyed female header should be soldered fromthe UEXT side with the UEXET silkscreen text on the top, and the lock facing the edge side. The male pins should be soldered from the opposite side labeled z-wave.

If you need a replacement and don't want to de-solder please reach out to store email.

RyanWor commented 2 months ago

Just wanted to note the product page is still showing the incorrect assembly. Just put one of mine together and wished I had seen this first 😆

image image
tube0013 commented 2 months ago

Apologies, I thought I had updated the photo, even had the cropped photo on my phone, but it must not have saved. I did just update as well as added a view of an assembled adapter with zwave module installed to show orientations.