[REQUEST] CC253x (CC2530/CC2531) flasher via zigpy-znp CLI tools - Githubissues

tube0013 / tubeszb_addons

Home Assistant add-ons for Flashing TubesZB Devices

Apache License 2.0

13 stars 4 forks source link

[REQUEST] CC253x (CC2530/CC2531) flasher via zigpy-znp CLI tools #3

Open Hedda opened 8 months ago

Hedda commented 8 months ago

Since already have other flashers could be nice to add a "TubesZB: TI CC253x Flasher Add-on" based on zigpy-znp CLI tools?

FYI, zigpy-znp can be used as stand-alone command line tool to flash Zigbee NCP application firmware CC2530/CC2531 adapters:

https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md
- https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md#cc2531-tools
- https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md#flash-operations
  - https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md#flash-read
  - https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md#flash-write

It would probably be a good idea to backup old firmware to file by default so there is an option to go back to the old version.

PS: Probably also be a good idea if it was possible to by default do an automation Zigbee network backup before flashing -> https://github.com/tube0013/tubeszb_addons/issues/2