Jetson: Create Wiki tutorial how to flash the Jetson

tum-phoenix / drive_ml

This is the repository for our Machine Learning applications

13 stars 3 forks source link

Jetson: Create Wiki tutorial how to flash the Jetson #25

Closed Christiaan1990 closed 5 years ago

Christiaan1990 commented 5 years ago

Goal:

Create a wiki totorial how to flash the Jetson

Assigments:

understand how the Jetson should be flashed
test the procedure
document results in the TUM-Wiki: https://wiki.tum.de/display/phoenix/Machine+Learning

Assigments:

for more information, please contact Mykyta

MaslinuPoimal commented 5 years ago

Could be a good starting issue.

MaslinuPoimal commented 5 years ago

Update: Auvidea has not yet provided Jetpack 4.2 availability with the TX2 and seems to be rather unwilling to do so. I have contacted them, waiting for response.

MaslinuPoimal commented 5 years ago

Response from Auvidea:

Hi Mykita,

Unfortunately, we haven’t been able to make any progress yet. We are stuck with our test setup; since the J90 doesn’t have HDMI output, we would always use a virtual machine to operate on a J90. However, with Jetpack 4.2, this virtual machine doesn’t work anymore, for some unknown yet reason, and the TX2 gets stuck in an endless reset loop on boot-up. So we are still looking for ways on how to solve this.

Best regards,

Dario

MaslinuPoimal commented 5 years ago

I have added a short description about how to perform the process here (sub-point "on the car").