Closed agocurti closed 8 months ago
tumic0
commented
8 months ago Your data file most probably defines its own style which takes precedence over what you have defined in GPXSee preferences if "Data->Use styles" is selected (the default). But without the data file, it's just guessing...
agocurti
commented
8 months ago Hi, where I must check the ‘Data->Use styles’ setting? In attach I send you my simple file.
Tino
From: Martin @.> Sent: venerdì 15 dicembre 2023 11:28 To: @.> Cc: @.>; @.> Subject: Re: [tumic0/GPXSee] Track line is hidden (Issue #527)
Your data file most probably defines its own style which takes precedence over what you have defined in GPXSee preferences if "Data->Use styles" is selected (the default). But without the data file, it's just guessing...
— Reply to this email directly, view it on GitHubhttps://github.com/tumic0/GPXSee/issues/527#issuecomment-1857634989, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BEWGS4QFY5KG4EQ3WT6G34DYJQQ5JAVCNFSM6AAAAABAWFQARKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNJXGYZTIOJYHE. You are receiving this because you authored the thread.Message ID: @.***>
tumic0
commented
8 months ago where I must check the ‘Data->Use styles’ setting?
In the application menu.
I send you my simple file.
Nothing has arrived as you can see on the issue page. The attached files must be in a limited set of enabled formats for GitHub to accept them - use the web interface to attach the file to the issue to get more info. Usually you need to ZIP the GPX/KML file.
agocurti
commented
8 months ago Hi Martin, I found the ‘Data->Use styles’ setting and I seen that this is set. If I unset the setting I see correctly my track! Thanks for your great suggest!
Have a nice day (and Merry Christmas)
From: Martin @.> Sent: venerdì 15 dicembre 2023 12:59 To: @.> Cc: @.>; @.> Subject: Re: [tumic0/GPXSee] Track line is hidden (Issue #527)
where I must check the ‘Data->Use styles’ setting?
In the application menu.
I send you my simple file.
Nothing has arrived as you can see on the issue page. The attached files must be in a limited set of enabled formats for GitHub to accept them - use the web interface to attach the file to the issue to get more info. Usually you need to ZIP the GPX/KML file.
— Reply to this email directly, view it on GitHubhttps://github.com/tumic0/GPXSee/issues/527#issuecomment-1857771566, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BEWGS4RVCALAMHETTBFAY6DYJQ3QPAVCNFSM6AAAAABAWFQARKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNJXG43TCNJWGY. You are receiving this because you authored the thread.Message ID: @.***>
Good morning, I just downloaded/installed the last GPXsee 13.12 release. I'm having an issue: I load a simple gpx file but I see only the start/end points, and NOT the track line... You can see in the attached file that are present the start/end point (purple squares), the current position (see black arrow), but the track line is quite hidden (green arrow on the light gray line). IN my setting I set the track line as blue and 3 px large... May be am I doing something wrong?