Closed GoogleCodeExporter closed 8 years ago
when I program char position statically (eg. char position=16) It works fine.
But When
position = gsm.IsSMSPresent(SMS_UNREAD);
It jumps over this line... Although position does contain a number.
Original comment by frederic...@gmail.com
on 17 Aug 2012 at 8:01
Sorry for the late but I was away.
For this:
- next to that, I want to chance the Rx and tx pin. from pins 4-5 to pins 6-7
I tried to chance the numbers in the GSM.cpp file but than, the program doesn't
respond anymore. I understood that I only need to chance two numbers over there?
You did right, but unfortunately Arduino does not support each pin for
SoftwareSerial, you should check that pin 6,7 support interrupt functions.
For the other problem, I'll check it. If you have news please post them.
Marco
Original comment by martines...@gmail.com
on 31 Aug 2012 at 4:50
Original comment by martines...@gmail.com
on 11 Dec 2012 at 5:01
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com
on 6 Jul 2013 at 11:27
Original issue reported on code.google.com by
frederic...@gmail.com
on 16 Aug 2012 at 7:17