Esp8266 and deep sleep mode

[manudax]

Hi, I try to set the deep sleep mode with wifimanager and I cannot get the full deep sleep mode. Without wifimanager I get 0.25µA in deep sleep mode but with my code even if I bypass the init in the setup I get 15mA of consuming. Is there any solution for this issue ?

`

include

include

include

include

include

bool SerialPrt = true; // Si on veux la sortie série long Time2Sleep = 30e6; // Temps du Deep Sleep en secondes String Message = ""; int CapteurTemp = 13; int TXRF = 12; int RXRF = 0; int Bpy = 5; // si passé à 0 alors on bypass

RH_ASK driver(2000, RXRF, TXRF, 0); OneWire oneWire(CapteurTemp); DallasTemperature sensors(&oneWire); DeviceAddress sensorDeviceAddress;

void Transmit(String ToTransmit) { byte DataLength = ToTransmit.length() + 1; char Data2Send[DataLength]; ToTransmit.toCharArray(Data2Send, DataLength); // Converted String to char. driver.send((uint8_t*)Data2Send, strlen(Data2Send)); driver.waitPacketSent(); }

float GetTempDS18() { float NewTemp = 20.5; return NewTemp; }

float GetVoltage() { float Tension = 5.00; return Tension; }

void setup() {

pinMode(CapteurTemp, INPUT_PULLUP); pinMode(Bpy, INPUT_PULLUP);

if (SerialPrt) { Serial.begin(115200); Serial.println(" "); Serial.print("Bpy : "); Serial.println(digitalRead(Bpy)); }

if (digitalRead(Bpy) == false) { // WiFiManager WiFiManager wifiManager; WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP wifiManager.setConfigPortalTimeout(180); wifiManager.autoConnect("xxx", "xxx"); // WiFiManager } else { // wifi_status_led_uninstall(); // WiFiMode(WIFI_STA); WiFi.disconnect(); WiFi.mode(WIFI_OFF); WiFi.forceSleepBegin(); delay(1);

driver.init();

if (SerialPrt) Serial.println("{\"Sync\":\"1ACFFC1D\",\"Module\":1,\"Temp\":" + String(GetTempDS18()) + ",\"Batt\":" + String(GetVoltage()) + "}");
Transmit("{\"Sync\":\"1ACFFC1D\",\"Module\":1,\"Temp\":" + String(GetTempDS18()) + ",\"Batt\":" + String(GetVoltage()) + "}");
ESP.deepSleep(Time2Sleep);

} }

void loop() { delay(250); }

`