Non blocking AP mode

[git-tiger]

I have a project that requires the ESP8266 to startup in access point mode, but the remaining code is blocked till the access point is configured. Is there any way to continue with the code, and still have access point available in the background?

[xserg]

esp 2.4.1, esp 12f nodemcu autoconnect example and my scetch works the same, cant save setting and cant open wifisave from info page Thanks

[tablatronix]

do you get a exception or dump?

[xserg]

WM: <- HTTP WiFi save
WM: Parameters WM: -------------------- WM: server: mqtt.**** WM: port: 1883 WM: username: ** *WM: password: *** *WM: --------------------

Exception (3): epc1=0x40217eb8 epc2=0x00000000 epc3=0x00000000 excvaddr=0x402521a2 depc=0x00000000 ctx: cont sp: 3fff0860 end: 3fff0e10 offset: 01a0

stack>>> 3fff0a00: 3ffefcf4 000005d0 3fff0a4c 402144b1
3fff0a10: 3fff2704 00000000 3fff0a4c 402144fe
3fff0a20: 402521a2 00000000 3fff0c30 402143d8
3fff0a30: 3fff2704 00000000 3fff0c30 40211ba9
3fff0a40: 00000000 00000000 00000000 3fff41bc
3fff0a50: 0000001f 0000001b 3fff420c 00000b0f
3fff0a60: 00000b06 00000009 3fff0ab0 4021447f
3fff0a70: 3ffefcf4 000005d0 000005d0 4020c0fc
3fff0a80: 00000002 00000001 3fff2ab4 40216337
3fff0a90: 00000000 00000000 3fff2ab4 4020c0f2
3fff0aa0: 3fff2ab4 3fff2748 3fff2ab4 4020c12e
3fff0ab0: 00000000 00000000 00000000 402145dc
3fff0ac0: 3fff2ab4 3fff2748 3fff2704 4020c1b5
3fff0ad0: 3fff3914 0000000f 00000009 00000000
3fff0ae0: 00000000 00000000 3fff2708 4020a424
3fff0af0: 00000057 00000001 00000001 00000001
3fff0b00: 00000002 3fff2f64 00000057 3fff2ab4
3fff0b10: 00000000 3fff31a4 3fff2704 3ffe8d89
3fff0b20: 00000001 3fff272c 3fff2704 4020c404
3fff0b30: 00000000 00000001 3fff23fc 4020b3ad
3fff0b40: 00000000 3fff31a4 3fff0c30 402143d8
3fff0b50: 00000000 00000001 3fff0c30 4021200b
3fff0b60: 00000000 00000000 3ffefdf0 00000001
3fff0b70: 00000000 3ffe8d89 40214f7c 3ffefdf0
3fff0b80: 00000000 00000001 3fff0c30 40214ff4
3fff0b90: 00000000 00000001 3fff0c30 40212b1d
3fff0ba0: 4025208e 00000199 00000199 4010020c
3fff0bb0: 3ffe8c03 3ffefad0 3fff0bec 3ffe8d89
3fff0bc0: 3ffe8d89 3ffefad0 3fff0c30 4020fe96
3fff0bd0: 3ffe8c03 3ffefad0 3fff0c30 40212cd0
3fff0be0: 00000000 00000000 00000000 00000000
3fff0bf0: 00000000 00000000 3fff0c30 4020f514
3fff0c00: 00000000 00000001 0000005f 40212d29
3fff0c10: feefeffe feefeffe 00000000 3ffef929
3fff0c20: 3ffe8544 3ffefd1c 3fff0d30 40208da0
3fff0c30: 3fff23fc 3fff2704 3fff1fb4 3fff1fb7
3fff0c40: 3fff1fb8 3fff1f2c 3fff1f38 3fff1f38
3fff0c50: 40107338 00000000 40107338 00000000
3fff0c60: 40107338 00000000 40107338 00000000
3fff0c70: 40107338 00000000 40107338 00000000
3fff0c80: 40107338 00000000 feef5035 3fff1f3c
3fff0c90: 0000000f 00000004 3fff1f54 0000000f
3fff0ca0: 00000000 3fff1f6c 0000000f 00000002
3fff0cb0: 3fff1f84 0000000f 0000000a 00000000
3fff0cc0: 00000000 00000000 00008210 0000821a
3fff0cd0: 00000001 3fff1f9c 0000000f 00000003
3fff0ce0: feefef00 00000001 000042d5 000007d0
3fff0cf0: feefef07 ffffffff 00000000 00000000
3fff0d00: 01000001 00010101 01010001 feefef01
3fff0d10: 3ffe8c03 3ffe8c03 00000001 01000000
3fff0d20: 01000000 00007531 00000004 00000005
3fff0d30: 3fff1fbc feef0201 3ffefd1c feefeffe
3fff0d40: feefeffe 00000000 feefeffe 40207020
3fff0d50: 3ffefd1c 40215f70 40215f5c 3ffe8c51
3fff0d60: 3ffe8c51 3fff1f04 00000020 00000001
3fff0d70: 3ffe8c03 3ffe8c48 3ffe8c48 3fff1edc
3fff0d80: 00000020 00000001 3ffe8c03 3ffe8d3b
3fff0d90: 3ffe8d36 3fff1ecc 00000005 00000001
3fff0da0: 3ffe8c03 3ffe8d2f 3ffe8d2a 3fff1e9c
3fff0db0: 00000028 00000001 3ffe8c03 40207020
3fff0dc0: feefeffe 40215f70 40215f5c feefeffe
3fff0dd0: 00000000 feefeffe feefeffe feefeffe
3fff0de0: feefeffe feefeffe feefeffe 3ffefddc
3fff0df0: 3fffdad0 00000000 3ffefdd4 40214fc0
3fff0e00: feefeffe feefeffe 3ffefdf0 40100710
<<<stack<<<

ets Jan 8 2013,rst cause:2, boot mode:(3,6)

[vaz83]

Hi, i have a nodeMCU board, parameters work fine without setting the wifiManager no nonblocking. Once i set it to true, it gives exception (3) as resets. Seems that when adding custom parameters is not compatible with nonblocking option. Are you guys fixing this? thanks

[tablatronix]

Cant fix if I cant reproduce. Make a new issue with small example.

[tablatronix]

I will test some more

[tablatronix]

I added some overflow fixes try now

[vaz83]

Will try now and let you know.

[vaz83]

Hi tablatronix, i've just tested, not working, now, even the parameters are not showing up, this is my code:

#include <FS.h>
#include <ESP8266WiFi.h> //ESP8266 Core WiFi Library (you most likely already have this in your sketch)
#include <DNSServer.h> //Local DNS Server used for redirecting all requests to the configuration portal
#include <ESP8266WebServer.h> //Local WebServer used to serve the configuration portal
#include <WiFiManager.h> //https://github.com/tzapu/WiFiManager WiFi Configuration Magic
#include <ArduinoJson.h>

WiFiManager wifiManager;
WiFiEventHandler gotIpEventHandler, disconnectedEventHandler;
char mqtt_server[40] = "0.0.0.0";
char mqtt_topicIN[80] ="IOT_Device/IN";
char mqtt_topicOUT[80] ="IOT_Device/OUT";
char mqtt_port[6]  = "1883";

/*
void handleRoot() {
  wifiManager.startWebPortal();
}

void handleReset() {
  server.send(200, "text/plain", "Resetting!");
    //Serial.println("diconnecting client and wifi");
    //client.disconnect();
    wifi_station_disconnect();

  WiFiManager wifiManager;
  wifiManager.resetSettings();
  ESP.reset();

}

void handleNotFound(){
  String message = "File Not Found\n\n";
  message += "URI: ";
  message += server.uri();
  message += "\nMethod: ";
  message += (server.method() == HTTP_GET)?"GET":"POST";
  message += "\nArguments: ";
  message += server.args();
  message += "\n";
  for (uint8_t i=0; i<server.args(); i++){
    message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
  }
  server.send(404, "text/plain", message);
}
*/

void setup()
{
  Serial.begin(115200);
  Serial.println("Setup mode...");
  //wifiManager.resetSettings();
   gotIpEventHandler = WiFi.onStationModeGotIP([](const WiFiEventStationModeGotIP & event)
  {
    Serial.print("Station connected, IP: ");
    Serial.println(WiFi.localIP());
  });

   disconnectedEventHandler = WiFi.onStationModeDisconnected([](const WiFiEventStationModeDisconnected & event)
  {
    Serial.println("Station disconnected!");
  });
  WiFiManagerParameter custom_text1("<p><b>MQTT Settings</b></p>");
  WiFiManagerParameter custom_mqtt_server("server", "Server IP", mqtt_server, 40);
  WiFiManagerParameter custom_mqtt_port("port", "Port", mqtt_port, 6);
  WiFiManagerParameter custom_mqtt_topicIN("topicIn", "Input Topic", mqtt_topicIN, 80);
  WiFiManagerParameter custom_mqtt_topicOUT("topicOut", "Output Topic", mqtt_topicOUT, 80);
  wifiManager.addParameter(&custom_text1);
  wifiManager.addParameter(&custom_mqtt_server);
  wifiManager.addParameter(&custom_mqtt_port);
  wifiManager.addParameter(&custom_mqtt_topicIN);
  wifiManager.addParameter(&custom_mqtt_topicOUT);

  wifiManager.setConfigPortalBlocking(false);

  wifiManager.autoConnect("IOT Device");

  /*
  server.on("/", handleRoot);

  server.on("/inline", []()
  {
    server.send(200, "text/plain", "this works as well");
  });
  server.on("/resetwifi", handleReset);
  server.onNotFound(handleNotFound);
  server.begin();
  */
  Serial.println("HTTP server started");
}

void loop()
{
  wifiManager.process();

  Serial.println("hello world");
  // put your main code here, to run repeatedly:
}

Now, even if you take the setConfigPortalBlocking, the parameters are no longer showing up.

In the serial I got this:

WM: <- Request redirected to captive portal WM: <- HTTP Root WM: Scan is cached WM: <- HTTP Wifi WM: Scan is cached WM: 1 networks found WM: AP: -35 V@Z Wifi WM: [ERROR] WiFiManagerParameter is out of scope WM: <- Request redirected to captive portal WM: <- HTTP Root *WM: Scan is cached

[tablatronix]

*WM: [ERROR] WiFiManagerParameter is out of scope

There you go

Your wifiparameter objects need to be global or in scope, once setup exits, the references are broken.

If anyone has better ideas how to do this, I am open to it.

You can make your parameters static, or define them outside of setup

[vaz83]

Hi Tablatronix, I have done what you said (put the variabes global at the beggining), the error still persists. Like I said, even if I comment the setConfigPortalBlocking(false), no parameters are shown and error *WM: [ERROR] WiFiManagerParameter is out of scope is shown. with the version of WM i had from yesterday it was working fine.

[tablatronix]

works for me

#include <WiFiManager.h> // https://github.com/tzapu/WiFiManager

WiFiManager wm;
  WiFiManagerParameter custom_mqtt_server("server", "mqtt server", "servername", 40);
  WiFiManagerParameter custom_mqtt_port("port", "mqtt port", "1234", 6);

void setup() {
    // put your setup code here, to run once:
    Serial.begin(115200);
    delay(3000);

    //WiFiManager, Local intialization. Once its business is done, there is no need to keep it around

    // add a custom input field

  WiFiManagerParameter custom_field("customfield", "Custom Field", "Default Value", 40);
  WiFiManagerParameter custom_token("api_token", "api token", "0123456789", 9); // overflow
  // WiFiManagerParameter custom_tokenb("invalid token", "invalid token", "abcdefghijk", 11);

  //add all your parameters here
  wm.addParameter(&custom_mqtt_server);
  wm.addParameter(&custom_mqtt_port);
  wm.addParameter(&custom_field);
  wm.addParameter(&custom_token);
  // wm.addParameter(&custom_tokenb); // overflow

    //reset settings - wipe credentials for testing
    //wm.resetSettings();

    wm.setConfigPortalBlocking(false);
    if(wm.autoConnect("AutoConnectAP")){
        //if you get here you have connected to the WiFi
        Serial.println("connected...yeey :)");
    }
    else 
    {
        Serial.println("non blocking config portal running");
    }

    wm.startConfigPortal("OnDemandAP");
}

void loop() {
    wm.process();
    // put your main code here, to run repeatedly:

}

[vaz83]

this is giving *WM: [ERROR] WiFiManagerParameter is out of scope .. Am I doing something wrong?

#include <WiFiManager.h> //https://github.com/tzapu/WiFiManager WiFi Configuration Magic

WiFiManager wm;
char mqtt_server[40] = "0.0.0.0";
char mqtt_topicIN[80] ="IOT_Device/IN";
char mqtt_topicOUT[80] ="IOT_Device/OUT";
char mqtt_port[6]  = "1883";

WiFiManagerParameter custom_mqtt_server("server", "Server IP", mqtt_server, 40);
WiFiManagerParameter custom_mqtt_port("port", "Port", mqtt_port, 6);
WiFiManagerParameter custom_mqtt_topicIN("topicIn", "Input Topic", mqtt_topicIN, 80);
WiFiManagerParameter custom_mqtt_topicOUT("topicOut", "Output Topic", mqtt_topicOUT, 80);

void setup()
{
  Serial.begin(115200);
  delay(3000);
  Serial.println("Setup mode...");
  //wifiManager.resetSettings();

  wm.addParameter(&custom_mqtt_server);
  wm.addParameter(&custom_mqtt_port);
  wm.addParameter(&custom_mqtt_topicIN);
  wm.addParameter(&custom_mqtt_topicOUT);

  wm.setConfigPortalBlocking(false);

  if(wm.autoConnect("IOT_Device"))
  {
    //if you get here you have connected to the WiFi
    Serial.println("connected...yeey :)");
  }
  else 
  {
    Serial.println("non blocking config portal running");
  }
  wm.startConfigPortal("IOT_Device"); 

}

void loop()
{
  wm.process();

  //Serial.println("hello world");
  // put your main code here, to run repeatedly:
}

[tablatronix]

testing

[tablatronix]

I dont see it

[tablatronix]

I am on esp32, should I test on 8266 also ?

[vaz83]

Can you please try on the 8266? Is the one I am using

[tablatronix]

Will do

[vaz83]

Hi tablatronix, were you able to test it on the esp8266 ? Parameters are not showing up :(

[tablatronix]

Yeah works fine there as well.

[vaz83]

It's working only with the version I had from last Friday, when I download the newer version it doesn't work

[tablatronix]

This was just patched this morning, there was a bug if you were not setting a default value, maybe that was causing an issue.

[xserg]

Hi! Thank you much for patching, it works fine now. Can you pls check setConfigPortalTimeout with setConfigPortalBlocking(false); The issue when config portal never disconnected. In case the router switched off, and esp rebooted in this time, config portal will start and never disconnected after time out and router up. (esp8266 12) Thanks

[tablatronix]

setConfigPortalTimeout is not implemented when configPortal is non blocking, because you are in control of it, and can stop it when you want

[xserg]

Thank you much for work, It seems in the example, onDemandNonBlocking, setConfigPortalBlocking(false); missing...

[xserg]

Hi @tablatronix, how to setup ap name in noblocking without autoconnect? tnx

[tablatronix]

You mean on demand? Same arguments to startconfogportal as autoconnect

[tablatronix]

can this be closed?

[vaz83]

Yes

[faizakbar18]

I try using this code, #500 and get error like this:

how to fix it?

NodeMCU v3