search

u-fire / Isolated_EC

An Arduino, Rust, and Python library for using the μFire Isolated EC Probe Interface
https://ufire.co
MIT License
5 stars 4 forks source link

Arduino compile issue #1

Closed rbrtwtrs closed 4 years ago

rbrtwtrs commented 4 years ago

Get following error when compiling in Arduino using Isolated RC Probe Interface 1.1.1

C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_JSON.cpp:2:18: error: missing binary operator before token "("

if __has_include("ArduinoJson.h")

              ^

C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_MP.cpp:2:18: error: missing binary operator before token "("

if __has_include("ArduinoJson.h")

              ^

Here is the full compile message que below.

Arduino: 1.8.11 Hourly Build 2019/11/11 03:33 (Windows 10), Board: "Adafruit WICED Feather, User Code"

C:\Arduino1,8\arduino-builder -dump-prefs -logger=machine -hardware C:\Arduino1,8\hardware -hardware C:\Users\Subpilot\AppData\Local\Arduino15\packages -tools C:\Arduino1,8\tools-builder -tools C:\Arduino1,8\hardware\tools\avr -tools C:\Users\Subpilot\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino1,8\libraries -libraries C:\Arduino1,8\Sketches\libraries -fqbn=adafruit:wiced:feather:section=usercode -ide-version=10811 -build-path C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038 -warnings=none -build-cache C:\Users\Subpilot\AppData\Local\Temp\arduino_cache_618972 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.wiced_dfu.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\tools\wiced_dfu\1.0.0 -prefs=runtime.tools.wiced_dfu-1.0.0.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\tools\wiced_dfu\1.0.0 -verbose C:\Arduino1,8\Sketches\FeatherOLED\FeatherOLED.ino C:\Arduino1,8\arduino-builder -compile -logger=machine -hardware C:\Arduino1,8\hardware -hardware C:\Users\Subpilot\AppData\Local\Arduino15\packages -tools C:\Arduino1,8\tools-builder -tools C:\Arduino1,8\hardware\tools\avr -tools C:\Users\Subpilot\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino1,8\libraries -libraries C:\Arduino1,8\Sketches\libraries -fqbn=adafruit:wiced:feather:section=usercode -ide-version=10811 -build-path C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038 -warnings=none -build-cache C:\Users\Subpilot\AppData\Local\Temp\arduino_cache_618972 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.wiced_dfu.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\tools\wiced_dfu\1.0.0 -prefs=runtime.tools.wiced_dfu-1.0.0.path=C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\tools\wiced_dfu\1.0.0 -verbose C:\Arduino1,8\Sketches\FeatherOLED\FeatherOLED.ino Using board 'feather' from platform in folder: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6 Using core 'maple' from platform in folder: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6 Detecting libraries used... "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for Wire.h: [Wire] ResolveLibrary(Wire.h) -> candidates: [Wire] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for Adafruit_GFX.h: [Adafruit_GFX_Library@1.6.1] ResolveLibrary(Adafruit_GFX.h) -> candidates: [Adafruit_GFX_Library@1.6.1] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for Adafruit_SSD1306.h: [Adafruit_SSD1306@2.0.1] ResolveLibrary(Adafruit_SSD1306.h) -> candidates: [Adafruit_SSD1306@2.0.1] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for Adafruit_FeatherOLED.h: [Adafruit_Feather_OLED@1.0.0] ResolveLibrary(Adafruit_FeatherOLED.h) -> candidates: [Adafruit_Feather_OLED@1.0.0] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for Adafruit_Sensor.h: [Adafruit_Unified_Sensor@1.0.3] ResolveLibrary(Adafruit_Sensor.h) -> candidates: [Adafruit_Unified_Sensor@1.0.3] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for adafruit_mqtt.h: [AdafruitMQTT] ResolveLibrary(adafruit_mqtt.h) -> candidates: [AdafruitMQTT] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for adafruit_aio.h: [AdafruitAIO] ResolveLibrary(adafruit_aio.h) -> candidates: [AdafruitAIO] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Alternatives for uFire_EC.h: [Isolated_EC_Probe_Interface@1.1.1] ResolveLibrary(uFire_EC.h) -> candidates: [Isolated_EC_Probe_Interface@1.1.1] "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o nul Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire\Wire.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire\WireBase.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library\Adafruit_GFX.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library\Adafruit_SPITFT.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library\glcdfont.c Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306\Adafruit_SSD1306.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED\Adafruit_FeatherOLED.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED\Adafruit_FeatherOLED_WiFi.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT\adafruit_mqtt.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT\adafruit_mqtt_topic.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed_color.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed_onoff.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed_pushbutton.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed_slider.cpp Using cached library dependencies for file: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO\adafruit_aio_feed_text.cpp Using cached library dependencies for file: C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC.cpp "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_JSON.cpp" -o nul Error while detecting libraries included by C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_JSON.cpp "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_MP.cpp" -o nul Error while detecting libraries included by C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_MP.cpp Generating function prototypes... "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -w -x c++ -E -CC -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\preproc\ctags_target_for_gcc_minus_e.cpp" "C:\Arduino1,8\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\preproc\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp" -o "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\sketch\FeatherOLED.ino.cpp.o" Compiling libraries... Compiling library "Wire" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Wire\Wire.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Wire\WireBase.cpp.o Compiling library "Adafruit_GFX_Library" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_GFX_Library\glcdfont.c.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_GFX_Library\Adafruit_SPITFT.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_GFX_Library\Adafruit_GFX.cpp.o Compiling library "Adafruit_SSD1306" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_SSD1306\Adafruit_SSD1306.cpp.o Compiling library "Adafruit_Feather_OLED" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_Feather_OLED\Adafruit_FeatherOLED.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Adafruit_Feather_OLED\Adafruit_FeatherOLED_WiFi.cpp.o Compiling library "Adafruit_Unified_Sensor" Compiling library "AdafruitMQTT" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitMQTT\adafruit_mqtt.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitMQTT\adafruit_mqtt_topic.cpp.o Compiling library "AdafruitAIO" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed_pushbutton.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed_color.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed_text.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed_slider.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio_feed_onoff.cpp.o Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\AdafruitAIO\adafruit_aio.cpp.o Compiling library "Isolated_EC_Probe_Interface" "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_JSON.cpp" -o "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Isolated_EC_Probe_Interface\uFire_EC_JSON.cpp.o" "C:\Users\Subpilot\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -O1 -w -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -DBOARD_feather -DVECT_TAB_BASE -DSTM32_HIGH_DENSITY -DERROR_LED_PORT=GPIOA -DERROR_LED_PIN=15 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple/libmaple" -mcpu=cortex-m3 -mlittle-endian -mfloat-abi=soft -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DARDUINO_STM32_FEATHER -DARDUINO_ARCH_WICED -DMCU_STM32F205RG -mthumb -DSTM32F2 "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\cores\maple" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\variants\feather" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED" "-IC:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT" "-IC:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO" "-IC:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src" "C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_MP.cpp" -o "C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Isolated_EC_Probe_Interface\uFire_EC_MP.cpp.o" Using previously compiled file: C:\Users\Subpilot\AppData\Local\Temp\arduino_build_533038\libraries\Isolated_EC_Probe_Interface\uFire_EC.cpp.o C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_JSON.cpp:2:18: error: missing binary operator before token "("

if __has_include("ArduinoJson.h")

              ^

C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface\src\uFire_EC_MP.cpp:2:18: error: missing binary operator before token "("

if __has_include("ArduinoJson.h")

              ^

Using library Wire in folder: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\Wire (legacy) Using library Adafruit_GFX_Library at version 1.6.1 in folder: C:\Arduino1,8\Sketches\libraries\Adafruit_GFX_Library Using library Adafruit_SSD1306 at version 2.0.1 in folder: C:\Arduino1,8\Sketches\libraries\Adafruit_SSD1306 Using library Adafruit_Feather_OLED at version 1.0.0 in folder: C:\Arduino1,8\Sketches\libraries\Adafruit_Feather_OLED Using library Adafruit_Unified_Sensor at version 1.0.3 in folder: C:\Arduino1,8\Sketches\libraries\Adafruit_Unified_Sensor Using library AdafruitMQTT in folder: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitMQTT (legacy) Using library AdafruitAIO in folder: C:\Users\Subpilot\AppData\Local\Arduino15\packages\adafruit\hardware\wiced\0.6.6\libraries\AdafruitAIO (legacy) Using library Isolated_EC_Probe_Interface at version 1.1.1 in folder: C:\Arduino1,8\Sketches\libraries\Isolated_EC_Probe_Interface exit status 1 Error compiling for board Adafruit WICED Feather.

justind000 commented 4 years ago

This has been an issue I've seen with ESP8266 chips. In that case, the compiler was behind the C++ standard. __has_include is C++17, however some compilers are old or don't support it. I will look into this platform a bit more, but to get your project to compile right now, you can simple delete the JSON and MP files in the library folder. If you are trying to use those two interfaces, you can just delete the __has_include #if / #endif lines and be sure to have ArduinoJson installed. 

Thank you for pointing this out. 

rbrtwtrs commented 4 years ago

Thanks, that did fix compile error but in the process I somehow bricked the bootloader. I have rev 1C of your EC board so is it code compatible? If not where do I find the old code?

On Sun, Nov 17, 2019 at 9:04 PM justind000 notifications@github.com wrote:

This has been an issue I've seen with ESP8266 chips. In that case, the compiler was behind the C++ standard. __has_include is C++17, however some compilers are old or don't support it. I will look into this platform a bit more, but to get your project to compile right now, you can simple delete the JSON and MP files in the library folder. If you are trying to use those two interfaces, you can just delete the __has_include #if / #endif lines and be sure to have ArduinoJson installed.

Thank you for pointing this out.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4DSOMMRSXTB2ZIZNNDQUIO63A5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJGENY#issuecomment-554852919, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGI5J4DW6NLTTJQYB6LLX7DQUIO63ANCNFSM4JOOB3QQ .

-- Robert Waters (909) 553-2668

justind000 commented 4 years ago

I don't know anything about that board, but I'm guessing getting the bootloader back on there is doable. 

1c is a bit old, but the code for it is here:

https://github.com/u-fire/ECSalinity/releases/tag/1.1.3

Justin Decker

Owner

uFire Co http://ufire.co

---- On Sun, 17 Nov 2019 21:24:11 -0800 Robert Waters notifications@github.com wrote ----

Thanks, that did fix compile error but in the process I somehow bricked the

bootloader. I have rev 1C of your EC board so is it code compatible? If not

where do I find the old code?

On Sun, Nov 17, 2019 at 9:04 PM justind000 mailto:notifications@github.com wrote:

This has been an issue I've seen with ESP8266 chips. In that case, the

compiler was behind the C++ standard. __has_include is C++17, however some

compilers are old or don't support it. I will look into this platform a bit

more, but to get your project to compile right now, you can simple delete

the JSON and MP files in the library folder. If you are trying to use

those two interfaces, you can just delete the __has_include #if / #endif

lines and be sure to have ArduinoJson installed.

Thank you for pointing this out.

—

You are receiving this because you authored the thread.

Reply to this email directly, view it on GitHub

https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4DSOMMRSXTB2ZIZNNDQUIO63A5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJGENY#issuecomment-554852919,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AGI5J4DW6NLTTJQYB6LLX7DQUIO63ANCNFSM4JOOB3QQ

.

--

Robert Waters (909) 553-2668

— You are receiving this because you commented. Reply to this email directly, https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AADKF3BBQWXX5SB6E624UU3QUIRHXA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHDGA#issuecomment-554856856, or https://github.com/notifications/unsubscribe-auth/AADKF3E66NR54L77XVETESLQUIRHXANCNFSM4JOOB3QQ.

rbrtwtrs commented 4 years ago

Yes, have to use my JLink and do a bit of fiddling. Are the new boards better? Resolution, noise etc? Maybe I'll buy some.

On Sun, Nov 17, 2019 at 9:33 PM justind000 notifications@github.com wrote:

I don't know anything about that board, but I'm guessing getting the bootloader back on there is doable.

1c is a bit old, but the code for it is here:

https://github.com/u-fire/ECSalinity/releases/tag/1.1.3

Justin Decker

Owner

uFire Co http://ufire.co

---- On Sun, 17 Nov 2019 21:24:11 -0800 Robert Waters < notifications@github.com> wrote ----

Thanks, that did fix compile error but in the process I somehow bricked the

bootloader. I have rev 1C of your EC board so is it code compatible? If not

where do I find the old code?

On Sun, Nov 17, 2019 at 9:04 PM justind000 <mailto: notifications@github.com> wrote:

This has been an issue I've seen with ESP8266 chips. In that case, the

compiler was behind the C++ standard. __has_include is C++17, however some

compilers are old or don't support it. I will look into this platform a bit

more, but to get your project to compile right now, you can simple delete

the JSON and MP files in the library folder. If you are trying to use

those two interfaces, you can just delete the __has_include #if / #endif

lines and be sure to have ArduinoJson installed.

Thank you for pointing this out.

—

You are receiving this because you authored the thread.

Reply to this email directly, view it on GitHub

< https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4DSOMMRSXTB2ZIZNNDQUIO63A5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJGENY#issuecomment-554852919 ,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AGI5J4DW6NLTTJQYB6LLX7DQUIO63ANCNFSM4JOOB3QQ

.

--

Robert Waters (909) 553-2668

— You are receiving this because you commented. Reply to this email directly, https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AADKF3BBQWXX5SB6E624UU3QUIRHXA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHDGA#issuecomment-554856856, or https://github.com/notifications/unsubscribe-auth/AADKF3E66NR54L77XVETESLQUIRHXANCNFSM4JOOB3QQ.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4CB7ALPFQ3NPH3DFYTQUISMJA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHV6Q#issuecomment-554859258, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGI5J4EUQDF3NFHWGCMT23TQUISMJANCNFSM4JOOB3QQ .

-- Robert Waters (909) 553-2668

rbrtwtrs commented 4 years ago

It appears that something with the code is incompatible with the board and causes it to corrupt the USB connection. I just have the following lines

include

uFire_EC ec;

I can comment out the uFire_EC ec; and it runs fine but if I uncomment it the board will hang and it drops the USB connection.

On Sun, Nov 17, 2019 at 10:40 PM Robert Waters rbrtwtrs@gmail.com wrote:

Yes, have to use my JLink and do a bit of fiddling. Are the new boards better? Resolution, noise etc? Maybe I'll buy some.

On Sun, Nov 17, 2019 at 9:33 PM justind000 notifications@github.com wrote:

I don't know anything about that board, but I'm guessing getting the bootloader back on there is doable.

1c is a bit old, but the code for it is here:

https://github.com/u-fire/ECSalinity/releases/tag/1.1.3

Justin Decker

Owner

uFire Co http://ufire.co

---- On Sun, 17 Nov 2019 21:24:11 -0800 Robert Waters < notifications@github.com> wrote ----

Thanks, that did fix compile error but in the process I somehow bricked the

bootloader. I have rev 1C of your EC board so is it code compatible? If not

where do I find the old code?

On Sun, Nov 17, 2019 at 9:04 PM justind000 <mailto: notifications@github.com> wrote:

This has been an issue I've seen with ESP8266 chips. In that case, the

compiler was behind the C++ standard. __has_include is C++17, however some

compilers are old or don't support it. I will look into this platform a bit

more, but to get your project to compile right now, you can simple delete

the JSON and MP files in the library folder. If you are trying to use

those two interfaces, you can just delete the __has_include #if / #endif

lines and be sure to have ArduinoJson installed.

Thank you for pointing this out.

—

You are receiving this because you authored the thread.

Reply to this email directly, view it on GitHub

< https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4DSOMMRSXTB2ZIZNNDQUIO63A5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJGENY#issuecomment-554852919 ,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AGI5J4DW6NLTTJQYB6LLX7DQUIO63ANCNFSM4JOOB3QQ

.

--

Robert Waters (909) 553-2668

— You are receiving this because you commented. Reply to this email directly, https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AADKF3BBQWXX5SB6E624UU3QUIRHXA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHDGA#issuecomment-554856856, or https://github.com/notifications/unsubscribe-auth/AADKF3E66NR54L77XVETESLQUIRHXANCNFSM4JOOB3QQ.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4CB7ALPFQ3NPH3DFYTQUISMJA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHV6Q#issuecomment-554859258, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGI5J4EUQDF3NFHWGCMT23TQUISMJANCNFSM4JOOB3QQ .

-- Robert Waters (909) 553-2668

-- Robert Waters (909) 553-2668

justind000 commented 4 years ago

Try running the SAMD example. I'm not sure if it's included in that version. Have a look in the newer repos. Some Arduino cores don't like the Wire library started outside of setup and will hang it. 

rbrtwtrs commented 4 years ago

I suspect you are right. Will look into that.

On Mon, Nov 18, 2019 at 4:14 AM justind000 notifications@github.com wrote:

Try running the SAMD example. I'm not sure if it's included in that version. Have a look in the newer repos. Some Arduino cores don't like the Wire library started outside of setup and will hang it.

Justin Decker

Owner

uFire Co ufire.co

---- On Sun, 17 Nov 2019 23:11:35 -0800 notifications@github.com wrote

It appears that something with the code is incompatible with the board and causes it to corrupt the USB connection. I just have the following lines

include

uFire_EC ec;

I can comment out the uFire_EC ec; and it runs fine but if I uncomment it the board will hang and it drops the USB connection.

On Sun, Nov 17, 2019 at 10:40 PM Robert Waters rbrtwtrs@gmail.com wrote:

Yes, have to use my JLink and do a bit of fiddling. Are the new boards better? Resolution, noise etc? Maybe I'll buy some.

On Sun, Nov 17, 2019 at 9:33 PM justind000 notifications@github.com wrote:

I don't know anything about that board, but I'm guessing getting the bootloader back on there is doable.

1c is a bit old, but the code for it is here:

https://github.com/u-fire/ECSalinity/releases/tag/1.1.3

Justin Decker

Owner

uFire Co http://ufire.co

---- On Sun, 17 Nov 2019 21:24:11 -0800 Robert Waters < notifications@github.com> wrote ----

Thanks, that did fix compile error but in the process I somehow bricked the

bootloader. I have rev 1C of your EC board so is it code compatible? If not

where do I find the old code?

On Sun, Nov 17, 2019 at 9:04 PM justind000 <mailto: notifications@github.com> wrote:

This has been an issue I've seen with ESP8266 chips. In that case, the

compiler was behind the C++ standard. __has_include is C++17, however some

compilers are old or don't support it. I will look into this platform a bit

more, but to get your project to compile right now, you can simple delete

the JSON and MP files in the library folder. If you are trying to use

those two interfaces, you can just delete the __has_include #if /

endif

lines and be sure to have ArduinoJson installed.

Thank you for pointing this out.

—

You are receiving this because you authored the thread.

Reply to this email directly, view it on GitHub

<

https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4DSOMMRSXTB2ZIZNNDQUIO63A5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJGENY#issuecomment-554852919

,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AGI5J4DW6NLTTJQYB6LLX7DQUIO63ANCNFSM4JOOB3QQ

.

--

Robert Waters (909) 553-2668

— You are receiving this because you commented. Reply to this email directly,

https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AADKF3BBQWXX5SB6E624UU3QUIRHXA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHDGA#issuecomment-554856856 , or

https://github.com/notifications/unsubscribe-auth/AADKF3E66NR54L77XVETESLQUIRHXANCNFSM4JOOB3QQ .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4CB7ALPFQ3NPH3DFYTQUISMJA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEJHV6Q#issuecomment-554859258 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AGI5J4EUQDF3NFHWGCMT23TQUISMJANCNFSM4JOOB3QQ

.

-- Robert Waters (909) 553-2668

-- Robert Waters (909) 553-2668

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/u-fire/Isolated_EC/issues/1?email_source=notifications&email_token=AGI5J4GYOB7Y5264X3UCJODQUKBLVA5CNFSM4JOOB3Q2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEKHXOI#issuecomment-554990521, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGI5J4BMKICJIXRWS7H6IV3QUKBLVANCNFSM4JOOB3QQ .

-- Robert Waters (909) 553-2668

justind000 commented 4 years ago

Fixed in version 1.1.2 library release.