Closed Drobny82 closed 4 years ago
When i push power button 3 times and then 4 hold my LED light turn on to magenta then LED turn off for a second and then start to be steady green. And from this moment nothing happened. When i turn Disco off by pushing one time power button when LED is steady green Disco came back to constant reboot. When i push power button few times (4 and 4 hold) between 22 sec reboot Disco just turn off. And to turn on it again i need to plug off battery and plug in again.
Hi Drobny82
The reason for the indent between reboot && exit
and rm /data/ftp/internal_000/adb /data/ftp/internal_000/mpp_update.plf
actually detonates that the first command is ran on SC2 and the second on the Disco. By just simply following the instructions 1:1, nothing can go wrong as the reboot kicks you out of SC2 automatically, so you "end up" on the Disco again where you use the "rm" command to remove the temporary file.
Why did you downgrade your Disco from 1.7.1 to 1.0.5? https://uavpal.com/disco/sub#requirements states clearly "Parrot Disco / Parrot Disco-Pro AG with firmware 1.4.1 to 1.7.1", 1.0.5 will not work with the softmod.
Why did you try for hours without joining the community on Slack and simply asking for help? https://uavpal.com/slack we have 1000+ members... The link is placed on the main Github page as well on the Installation Wiki page.
I don't think I can help you with this particular issue, never tried such a low firmware version. However, the download link provided for 1.0.5 is from the domain firmware.parrot.com and thus 100% genuine.
You can try to reset the Disco: To reset Parrot Disco, make two short presses and then a long press (about 10 seconds) on the on/off button of your Parrot Disco. The light of the on/off button flashes orange and red and Parrot Disco switches off. To complete the reset process, switch on Parrot Disco.
Good luck! SoftIce
Hi. Thanks for answer. First reason to downgrade of Disco and SK2 was to upgrade it again to try install softmod again because in the first time i just did something wrong. Second i thought i can do this without any help when i just follow instruction 1:1 but i was wrong because i did not understand few thinks but i decide to just try it because i thought i can easily downgrade Disco and SK2 so i was wrong again. Reset just not work in my case i think i need to buy new Disco and try it again but this time with help to do everything well. Thanks for link to the group ill join there. When ill find good pre owned Disco ill ask later about few thinks. Thank You again.
@Drobny82 do you still have the CHUCK? I can repair it
@Drobny82 do you still have the CHUCK? I can repair it
Sold it few months ago. But thanks for answer.
I have same problem how can you repair it?
@AlgirdasPro Sure. I specialize in CHUCK repairs.
EDIT: Oh, I just took a better look at your question. I am sorry but I spent quite a lot of time figuring how to do it. I only sell the repair service. I can repair it remotely so you won't spend extra money on shipping
@AlgirdasPro Sure. I specialize in CHUCK repairs.
EDIT: Oh, I just took a better look at your question. I am sorry but I spent quite a lot of time figuring how to do it. I only sell the repair service. I can repair it remotely so you won't spend extra money on shipping
How can i contact you?
Hi everyone. I have BIG PROBLEM. Can anybody help ? So i am a Disco owner few months now. I try flight in default (get from box and start fly) and did it is awesome toy ! But i decide to get UAVPAL in it. My Parrot is (was) 1.7.1 ver and Skycontroller 2 is 1.0.9 (silver joysticks with white line on antenna). So in the beginning i found a movie on YT:
https://www.youtube.com/watch?v=vKB7fNwb4ps
I try to do exactly the same as on movie. But Disco was not connected to my ZeroTier network. Only Skycontroller worked very well and was connected. Then i go to the link below the movie description and i found GitHub site :) So after hours of try do exactly as on:
https://github.com/uavpal/disco4g/wiki/Installation.
Situation was still the same. Skycontroller worked well and was connected but Disco not. So i decide to downgrade both. First i try did Skycontroller to downgrade i did same thing as here:
https://github.com/uavpal/disco4g/wiki/Manual-firmware-upgrade-and-downgrade-of-Parrot-Skycontroller-2
But i was confusing on the end exactly there:
/data/ftp/internal_000/adb shell /usr/bin/pinst_trigger 1 reboot && exit rm /data/ftp/internal_000/adb /data/ftp/internal_000/mpp_update.plf
So after reboot && exit i went back to CMD and i turn on telenet on disco (2 x disco power button) and i copy and paste this line:
telnet 192.168.42.1
And then last line:
rm /data/ftp/internal_000/adb /data/ftp/internal_000/mpp_update.plf
And i did reboot && exit again. So my controller was still same firmware 1.0.9 and i still could connect it with my ZeroTier network. Then i try to downgrade my Disco manually from 1.7.1 to 1.0.5 because when i try push power button 4 times (4 hold) as on this movie from YT:
https://www.youtube.com/watch?v=Fpqxa6wLkq0
Then like on this movie 3 times and hold:
https://www.youtube.com/watch?v=btgUetj9Lnw
Just nothing happend. On the comments below i found info about ver. 1.7.1 that does not work with this ver. of Disco and i need to do this manually. So i go to this site:
https://github.com/uavpal/disco4g/wiki/Manual-firmware-upgrade-and-downgrade-of-Parrot-Disco
So this step was really easy because after hours of trying everything before i was closer to understand everything well :) But in the end when Disco should reboot 3 times (Wait for about 3 minutes while the Disco firmware gets installed (the Disco will reboot 3 times) my Disco start to reboot constantly and blue light is constant to and rebooting never stop :) Even after 20 min and more. So i cant even go to connect it to my WI-FI to go there with FileZilla and even when i try to connect it to PC with USB micro cable nothing happend. After everything i even try this with ver. 1.7.0:
VIA A MICRO USB FLASH DRIVE
My Disco reboot every 22 sec and do this every time when i turn it on. I do not know what i need to do now because now i cant fly my Disco even in default without UAVPAL. If anybody can help i will be very grateful.