Open lukashalm opened 9 years ago
i found undocumented code range 418-470 that has response 200 most of codes displays only message with X (http://i.imgur.com/neWjzKL.png) except four 458 - prompt for channel scanning (http://i.imgur.com/4ZUlmN6.png) 419,432,445 - set dtv channel 0 (http://i.imgur.com/IxVZZBz.png)
thanks. referenced mrchnk's comment on start page.
also there is no codes with response 200 in range 471-65535 not sure about service codes availability using that method
Hi there, the mapping from Ajay Ramaswamy didn't work for my 47LM640S-ZA. I just tried every number, here is what i found:
1 Power OFF 2 Button 0 3 Button 1 4 Button 2 5 Button 3 6 Button 4 7 Button 5 8 Button 6 9 Button 7 10 Button 8 11 Button 9 12 UP 13 DOWN 14 LEFT 15 RIGHT 20 Enter 42 Enter in Apps 403 Back 408 Back in Apps 412 Exit 29 Blue 30 Green 31 Red 32 Yellow 24 Volume UP 25 Volume DOWN 26 Mute 44 Channel Guide 404 Channel Favorites 50 Channel List 27 Channel UP 28 Channel DOWN 51 Teletext 406 Text Option 33 Play 34 Pause 35 Stop 36 Fast Forward 37 Rewind 40 Rec 21 Home 417 MyApps 45 Info 46 Screen Format 47 External Input 405 Quickmenue 407 Audio Description 409 Energy 410 AV-Mode 49 Subtitle 411 Simplink 400 3D 22 Preferences 458 Search Channels 419 Set Channel 0 TV only 432 Set Channel 0 TV only 445 Set Channel 0 TV only
thanks. referenced s-e-v-e-n's comment on start page.
So just to be clear, there's still no way to get into the service menus on the newer LG TVs?
NB: This script only worked for me from Windoze box running Python x86 when connected directly to LG Soft AP, steps below should get you connected just fine
My need is to enable Pass Through of 5.1 (6ch) audio from HDMI input to TOSLINK Optical output. At present any AV containing 5.1 sent to HDMI on the 42LA6230 TV is down-mixed to 2 (stereo) then sent out via TOSLINK Optical. Which means I can enjoy any media I want on my TV so long as: a) I am happy to use the stereo speakers in the TV only, or b) I am happy with only stereo audio on my HT surround system, or c) I am happy to physically swap the TOSLINK cable from one source device to another each time I change what I am using
Answer to {a|b|c} = No
Many have stated that it is a simple on|off toggle in EZ_ADJUST to enable 5.1 pass through from HDMI to TOSLINK, but access to the service menu is required. I very much appreciate the work done to get this far, hopeful there may be something more we can do to expose/access the innards of LG TVs? I can't can believe they'd just hobble a function of the technology for market control.
For HDMI connected devices, in order for the TV to pass DD 5.1 you will need a service remote. In the EZ Adjust menu go to tool option 7 and change the EDID setting from PCM to AC3. TV will reboot and you will have full 5.1 pass through.
In newer tv models or old tv models with updated firmware, service menus like EZ_ADJUST may no longer be accessible through LAN. However, a suitable infrared remote control may still work. I have not tried it.
can confirm that custom ir-control works for EZ_ADJUST and IN_START with my LG 47LM640T (firmware 04.62.10). i have made ir-control using just 2 red diodes and send command using headphone jack and specific audio files
Can confirm access to EZ_ADJUST menu on 42LA6230 running software version 04.28.13 SDK Version 03.03 using Logitech Harmony One remote in following manner:
EZ_ADJUST menu can now be accessed simply by pressing the assigned button.
*NB: EZ-ADJ command was not available for my model LG TV (42LA6230) but was for the model specified in the steps above. Python script works excellently for most other commands, just not EZ_ADJUST or IN_START menu invocation commands, I may likely use this in a RPi touch screen controller project, thanks for developing it.
Can confirm as of 2018 MyHarmony still offers EZ-ADJ for the model that zer0ring specifies.
Hello, does anyone find out what is the keycode for enabling In Start menu on LG's 2012?