feat: count input

[Keyrxng]

resolves #12

added count input

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, it seems that there are specific changes requested in the pull request. The requested change is to update the code in the app/page.tsx file. Specifically, the change is to replace the line const { count, setCount } = useState(0); with const [count, setCount] = useState(0);.

To address this request, you need to make the requested changes in the app/page.tsx file by replacing the line as mentioned. Once the changes are made, you can resubmit the pull request for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, it seems that changes are needed in the app/page.tsx file. Specifically, the following changes are requested:

import { useState } from "react";

const { count, setCount } = useState(0);

Please make the requested changes and resubmit the pull request for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, it seems that changes are needed in the app/page.tsx file. Specifically, the following changes are requested:

import { useState } from "react";

const { count, setCount } = useState(0);

Please make the requested changes and resubmit the pull request for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, it seems that changes are needed in the app/page.tsx file. Specifically, the following changes are requested:

import { useState } from "react";

const { count, setCount } = useState(0);

Please make the requested changes and resubmit the pull request for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Based on the provided information, the following changes are needed in the pull request:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

Please make these changes in the pull request and resubmit it for review.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

There are no requested changes in the pull request. Therefore, I will approve the pull request.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

There are no requested changes for this pull request. Therefore, I will approve the pull request.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

! Error: Invalid value for 'content': expected a string, got null.

[Keyrxng]

/review

[ubqbot[bot]]

I have reviewed the requested changes and here is an explanation of why they are needed:

1. In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object. By using array destructuring, we can correctly assign the count and setCount variables to the elements of the array returned by useState.

2. In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count. Currently, the value is treated as a string, which may lead to unexpected behavior when performing calculations or comparisons with the count.

3. In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON. The presence of a trailing comma can cause parsing errors and is considered invalid syntax in JSON.

To summarize, the requested changes are necessary to ensure correct functionality and adherence to JSON syntax. By making these changes, we can improve the code quality and avoid potential issues.

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Keyrxng, you have requested changes to be made.

Changes are needed here:

• In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.
• In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.

Changes are needed here:

• In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

  Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

Keyrxng requested changes

• [x] In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.
• [x] In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.
• [x] In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

  Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[Keyrxng]

/review

[ubqbot[bot]]

Keyrxng requested changes

• [ ] In app/page.tsx, on line 7, change const { count, setCount } = useState(0); to const [count, setCount] = useState(0);. The useState hook returns an array, not an object.
• [ ] In app/page.tsx, on line 11, change onChange={(e) => setCount(e.target.value)} to onChange={(e) => setCount(parseInt(e.target.value))}. The value of the input should be parsed as an integer before setting it as the count.
• [ ] In tsconfig.json, on line 10, remove the trailing comma after "esnext". Trailing commas are not allowed in JSON.

  Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

! Validating the pull request response may have failed.

[Keyrxng]

/review

[ubqbot[bot]]

! Validating the pull request response may have failed.

[Keyrxng]

/review

[ubqbot[bot]]

! Validating the pull request response may have failed.

[Keyrxng]

/review

[ubqbot[bot]]

null

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

undefined

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[ubqbot[bot]]

undefined

Ensure the pull request requirements are in the linked issue's first comment and update it if the scope evolves.

[Keyrxng]

/review

[Keyrxng]

/review

[Keyrxng]

/review