search

ufrisk / pcileech-fpga

FPGA modules used together with the PCILeech Direct Memory Access (DMA) Attack Software
913 stars 206 forks source link

PCIe Screamer Flash #34

Closed ch1nw3ll closed 4 years ago

ch1nw3ll commented 5 years ago

My friend has asked me to look at this, but i use the sp605 so i don't have a clue. Does this look like an ok flash? The "warn" near the top is a worry.. If it all looks ok, which button can he press to test all is ok?

Open On-Chip Debugger 0.10.0+dev-00653-g167cff09-dirty (2019-01-16-13:43) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html none separate Info : auto-selecting first available session transport "jtag". To override use 'transport select '. adapter speed: 10000 kHz Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Info : clock speed 10000 kHz Info : JTAG tap: xc7.tap tap/device found: 0x0362d093 (mfg: 0x049 (Xilinx), part: 0x362d, ver: 0x0) loaded file bscan_spi_xc7a35t.bit to pld device 0 in 0s 229207us Info : JTAG tap: xc7.tap tap/device found: 0x0362d093 (mfg: 0x049 (Xilinx), part: 0x362d, ver: 0x0) Info : Found flash device 'micron n25q256 3v' (ID 0x0019ba20) Warn : device needs paging or 4-byte addresses - not implemented flash 'jtagspi' found at 0x00000000 auto erase enabled Info : Found flash device 'micron n25q256 3v' (ID 0x0019ba20) Warn : device needs paging or 4-byte addresses - not implemented Info : Found flash device 'micron n25q256 3v' (ID 0x0019ba20) Warn : device needs paging or 4-byte addresses - not implemented Info : Found flash device 'micron n25q256 3v' (ID 0x0019ba20) Warn : device needs paging or 4-byte addresses - not implemented Info : sector 0 took 119 ms Info : sector 1 took 124 ms Info : sector 2 took 122 ms Info : sector 3 took 118 ms Info : sector 4 took 117 ms Info : sector 5 took 119 ms Info : sector 6 took 119 ms Info : sector 7 took 119 ms Info : sector 8 took 121 ms Info : sector 9 took 118 ms Info : sector 10 took 118 ms Info : sector 11 took 117 ms Info : sector 12 took 116 ms Info : sector 13 took 120 ms Info : sector 14 took 119 ms Info : sector 15 took 119 ms Info : sector 16 took 117 ms Info : sector 17 took 119 ms Info : sector 18 took 117 ms Info : sector 19 took 119 ms wrote 1310720 bytes from file pcileech_pciescreamer_top.bin in 16.316063s (78.450 KiB/s) Info : Found flash device 'micron n25q256 3v' (ID 0x0019ba20) Warn : device needs paging or 4-byte addresses - not implemented read 1252128 bytes from file pcileech_pciescreamer_top.bin and flash bank 0 at offset 0x00000000 in 1.156874s (1056.970 KiB/s) contents match shutdown command invoked

Thanks

ufrisk commented 5 years ago

I have no idea, I'm not an OpenOCD expert.

But you can try to press the button SW3 (marked as TEST BTN in green in the image below) to see if a LED blinks when you press it (then it's probably correctly flashed).

ufrisk commented 4 years ago

I'm closing this issue due to old age.