ukama / ukama-nodes

Ukama hardware stuff
26 stars 5 forks source link

TDD Switching Issue-B48/B41/B40 #39

Open Sharabu-Naveen opened 1 year ago

Sharabu-Naveen commented 1 year ago

Configure the TRX module with TDD mode Issue-TDD is not configuring in the TRX board with TDD package and configurations

Need to add front end (amplifier unit ) and run above test at 1W power along with switching delay from TRX to amplifier node

Sharabu-Naveen commented 1 year ago

Test Case 1:-I Tested the FDD mode and to make sure system is working fine . Observation:- ETM is running fine and logs are captured(FDD_logs) Test Case-2: tested with the TDD binaries and changed the DUPLEXMODE =TDD Observation: ETM is not running and logs are captured(TDD_logs_1)

Test case 3:- With new binaries and configuration files we tested e2e call in TDD mode we observed spectrum is switching in the Evaluation module anlayzer , but the TX/RX switching pin and duplex registers still showing in FDD .

Need to check the same setup in LTE TDD spectrum analyzer and EVM to make sure TDD E2E is working fine