search

ulic75 / power-flow-card

A power distribution card inspired by the official Energy Distribution card for Home Assistant
170 stars 27 forks source link

gas consumption is missing #88

Closed pbranly closed 2 years ago

pbranly commented 2 years ago

Please add gas consumption philippe

ulic75 commented 2 years ago

I don't have gas measurement. Do you have a screenshot of how gas appears in the official Energy Distribution card?

pbranly commented 2 years ago

image image image image

pbranly commented 2 years ago

But as you can see the official distribution does not add grid and gas This is an issue that they don't (yet) want to correct Phil

ulic75 commented 2 years ago

When you say gas are you meaning a gasoline generator that produces electricity or do you mean something like propane or natural gas which produces heat?

pbranly commented 2 years ago

Hi I mean natural gas which produces heat for central heating system and hot water for bathroom. In the home assistant energy menu, it possible to enter either volume in m3 with a kWh/m3 coefficient or kWh. This is working fine but as said in a previous message, the developer does not want to correct the fact that grid (electricity) and gas energy are not added Regards Philippe

joeph84 commented 2 years ago

I would love to see gas in the overview as well. For me the screenshot looks like this. The gas is read by the P1 smart meter and the gas is used for hot water and heating. image

pbranly commented 2 years ago

It is a pity that in your exemple gas is equal to 0 m3 With a value , you should see that the "home" total does not take gas in consideration This is for me a bug Phil

joeph84 commented 2 years ago

It is just about completeness of usage of utilities in the house. I would love to be able to add waterflow there as well.

burrellka commented 2 years ago

love it! great suggestion. and I second everyone here in saying this is an amazing card. Great job.

I second what was suggested here. Add water two. To me this is the same as the other request to add two custom entities. So they done "add" to the total of the house, but are more informational based. Could be used for gas, water, a custom entity, etc.

also, if the unit of measurements could be pulled from the entities (such as kW, kWh, etc) that would be awesome!

ForumHulp commented 2 years ago

Missing also gas and water, please add

burrellka commented 2 years ago

Hi @ulic75 , I just wanted to say thank you!!!! I noticed you created a new branch for gas and water, and I went ahead and pulled your latest pull request, compiled it and deployed it to my instance. I am absolutely loving the WIP!!!! I know you are super busy, and from me and the community I just wanted to say thank you. Can't wait until you have a chance to finish this and check the final code in

Here is what it looks like on my instance

image

burrellka commented 2 years ago

Hi Hi @ulic75 , I saw that you made another commit for this that fixed the misaligned lines above. I pulled it down and deployed it. Thank you!!!! that fixed my issue (see below) . I am using to show today's consumption (I know no kwh, but that's minor and i'm good with it) and current consumption with no battery. Looks great!!! My only issue now is it only shows on my pc and the new code does not seem to render on mobile. But that's not a problem, I figured I just need to wait for the official release update in HACS for it to show in mobile. Any idea when you plan to release this to HACS? Thanks again for all your hard work, we all know you are busy and we appreciate it.

image

image

ulic75 commented 2 years ago

:tada: This issue is resolved in version 2.6.0 :tada:

The release is available on GitHub release