Since updating the Dock firmware this morning, I cannot connect to the dock anymore.
The handheld is still connected to the network and approachable via the web config (but the dock is not).
How to Reproduce
Add a password (prompted by the update to the Home Assistant integration)
Update the Dock firmware to 0.10.0
Go to the Web Config
Try to alter settings
Get message "Connection to dock not established"
(Home Assistant integration also stops working)
Expected behavior
Dock to work
System version
1.7.14
What part of the system affected by the problem?
Overall system
Additional context
I've reset the dock (physically, by pushing the button at the bottom with a paperclip for 10 sec as indicated).
Afterwards, there were 5 red flashes of the led, then a longer turning into orange, and finally a couple of white flashes of the led. All happened with the ethernet cable connected to the dock.
Navigating to the Dock IP address in a browser afterwards provides this:
Name
UC-Dock-[edited out]
Hostname
UC-Dock-[edited out]
Version
0.10.0
Serial
[edited out]
Model
UCD2
Revision
5.4
Free heap
140228
Uptime
0 days 02:22:22
Reset reason
Software reset CPU
Solution
Remove dock (using remote) and re-add.
The remote immediately discovered the dock, yet first time adding it failed. Second time it worked.
Error on first trial mentioned an authentication issue, which is in sync with the recent addition of a password, prompted by the update of the Home Assistant integration...
Is there an existing issue for this?
Description
Since updating the Dock firmware this morning, I cannot connect to the dock anymore. The handheld is still connected to the network and approachable via the web config (but the dock is not).
How to Reproduce
Expected behavior
Dock to work
System version
1.7.14
What part of the system affected by the problem?
Overall system
Additional context
I've reset the dock (physically, by pushing the button at the bottom with a paperclip for 10 sec as indicated). Afterwards, there were 5 red flashes of the led, then a longer turning into orange, and finally a couple of white flashes of the led. All happened with the ethernet cable connected to the dock.
Navigating to the Dock IP address in a browser afterwards provides this:
Name UC-Dock-[edited out] Hostname UC-Dock-[edited out] Version 0.10.0 Serial [edited out] Model UCD2 Revision 5.4 Free heap 140228 Uptime 0 days 02:22:22 Reset reason Software reset CPU
Solution
Remove dock (using remote) and re-add. The remote immediately discovered the dock, yet first time adding it failed. Second time it worked. Error on first trial mentioned an authentication issue, which is in sync with the recent addition of a password, prompted by the update of the Home Assistant integration...