search

unifreq / openwrt_packit

Flippy's openwrt packaged source code
1.36k stars 402 forks source link

openwrt rootfs 编译注意事项里提示的已全部选上。perlbase-time perlbase-xlsoader已选，N1打包后无法显示CPU架构和CPU状态 #112

Closed luckyreny closed 2 years ago

luckyreny commented 2 years ago

openwrt rootfs 编译注意事项里提示的已全部选上。 perlbase-time perlbase-xlsoader 已选上 以下是SSH登录信息

PLATFORM: amlogic SOC: s905d BOARD: n1

Can't locate File/Glob.pm in @INC (you may need to install the File::Glob module) (@INC contains: /usr/lib/perl5/5.28) at /usr/bin/cpustat line 32. BEGIN failed--compilation aborted at /usr/bin/cpustat line 32. Can't locate File/Glob.pm in @INC (you may need to install the File::Glob module) (@INC contains: /usr/lib/perl5/5.28) at /usr/bin/cpustat line 32. BEGIN failed--compilation aborted at /usr/bin/cpustat line 32. Can't locate File/Glob.pm in @INC (you may need to install the File::Glob module) (@INC contains: /usr/lib/perl5/5.28) at /usr/bin/cpustat line 32. BEGIN failed--compilation aborted at /usr/bin/cpustat line 32. 设备信息： Phicomm N1 CPU 型号: 运行时间: 环境温度: 49.0 °C Can't locate File/Glob.pm in @INC (you may need to install the File::Glob module) (@INC contains: /usr/lib/perl5/5.28) at /usr/bin/cpustat line 32. BEGIN failed--compilation aborted at /usr/bin/cpustat line 32. 当前频率: 内存已用: 9% of 1809MB IP 地址: 192.168.1.1 启动存储: 16% of 511.0M 系统存储: 23% of 960.0M

水平有限，.config里并没有搜索到Glob module.

unifreq commented 2 years ago

那就是还缺 perlbase-File这个包吧，早期的perl脚本不依赖这个，后面改过了。

luckyreny commented 2 years ago

那就是还缺 perlbase-File这个包吧，早期的perl脚本不依赖这个，后面改过了。

好的大佬，马上去试试。确实，早期没发现CPU不显示这个问题。后来不知道哪个版本开始就有了。自己编译的原因是只编译自己需要的最小的包。也用过别人的包感觉没那么稳。

luckyreny commented 2 years ago

那就是还缺 perlbase-File这个包吧，早期的perl脚本不依赖这个，后面改过了。

已解决。谢谢大佬！