Bump apache-airflow from 2.9.1 to 2.10.0 in /apps/sps

[dependabot[bot]]

Bumps apache-airflow from 2.9.1 to 2.10.0.

Release notes

Sourced from apache-airflow's releases.

Apache Airflow 2.10.0

Significant Changes

Datasets no longer trigger inactive DAGs (#38891)

Previously, when a DAG is paused or removed, incoming dataset events would still trigger it, and the DAG would run when it is unpaused or added back in a DAG file. This has been changed; a DAG's dataset schedule can now only be satisfied by events that occur when the DAG is active. While this is a breaking change, the previous behavior is considered a bug.

The behavior of time-based scheduling is unchanged, including the timetable part of DatasetOrTimeSchedule.

try_number is no longer incremented during task execution (#39336)

Previously, the try number (try_number) was incremented at the beginning of task execution on the worker. This was problematic for many reasons. For one it meant that the try number was incremented when it was not supposed to, namely when resuming from reschedule or deferral. And it also resulted in the try number being "wrong" when the task had not yet started. The workarounds for these two issues caused a lot of confusion.

Now, instead, the try number for a task run is determined at the time the task is scheduled, and does not change in flight, and it is never decremented. So after the task runs, the observed try number remains the same as it was when the task was running; only when there is a "new try" will the try number be incremented again.

One consequence of this change is, if users were "manually" running tasks (e.g. by calling ti.run() directly, or command line airflow tasks run), try number will no longer be incremented. Airflow assumes that tasks are always run after being scheduled by the scheduler, so we do not regard this as a breaking change.

/logout endpoint in FAB Auth Manager is now CSRF protected (#40145)

The /logout endpoint's method in FAB Auth Manager has been changed from GET to POST in all existing AuthViews (AuthDBView, AuthLDAPView, AuthOAuthView, AuthOIDView, AuthRemoteUserView), and now includes CSRF protection to enhance security and prevent unauthorized logouts.

OpenTelemetry Traces for Apache Airflow (#37948).

This new feature adds capability for Apache Airflow to emit 1) airflow system traces of scheduler, triggerer, executor, processor 2) DAG run traces for deployed DAG runs in OpenTelemetry format. Previously, only metrics were supported which emitted metrics in OpenTelemetry. This new feature will add richer data for users to use OpenTelemetry standard to emit and send their trace data to OTLP compatible endpoints.

Decorator for Task Flow (@skip_if, @run_if) to make it simple to apply whether or not to skip a Task. (#41116)

This feature adds a decorator to make it simple to skip a Task.

Using Multiple Executors Concurrently (#40701)

Previously known as hybrid executors, this new feature allows Airflow to use multiple executors concurrently. DAGs, or even individual tasks, can be configured to use a specific executor that suits its needs best. A single DAG can contain tasks all using different executors. Please see the Airflow documentation for more details. Note: This feature is still experimental. See documentation on Executor <https://airflow.apache.org/docs/apache-airflow/stable/core-concepts/executor/index.html#using-multiple-executors-concurrently>_ for a more detailed description.

Scarf based telemetry: Does Airflow collect any telemetry data? (#39510)

Airflow integrates Scarf to collect basic usage data during operation. Deployments can opt-out of data collection by setting the [usage_data_collection]enabled option to False, or the SCARF_ANALYTICS=false environment variable. See FAQ on this <https://airflow.apache.org/docs/apache-airflow/stable/faq.html#does-airflow-collect-any-telemetry-data>_ for more information.

... (truncated)

Changelog

Sourced from apache-airflow's changelog.

Airflow 2.10.0 (2024-08-15)

Significant Changes ^^^^^^^^^^^^^^^^^^^

Datasets no longer trigger inactive DAGs (#38891) """""""""""""""""""""""""""""""""""""""""""""""""

Previously, when a DAG is paused or removed, incoming dataset events would still trigger it, and the DAG would run when it is unpaused or added back in a DAG file. This has been changed; a DAG's dataset schedule can now only be satisfied by events that occur when the DAG is active. While this is a breaking change, the previous behavior is considered a bug.

The behavior of time-based scheduling is unchanged, including the timetable part of DatasetOrTimeSchedule.

try_number is no longer incremented during task execution (#39336) """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

Previously, the try number (try_number) was incremented at the beginning of task execution on the worker. This was problematic for many reasons. For one it meant that the try number was incremented when it was not supposed to, namely when resuming from reschedule or deferral. And it also resulted in the try number being "wrong" when the task had not yet started. The workarounds for these two issues caused a lot of confusion.

Now, instead, the try number for a task run is determined at the time the task is scheduled, and does not change in flight, and it is never decremented. So after the task runs, the observed try number remains the same as it was when the task was running; only when there is a "new try" will the try number be incremented again.

One consequence of this change is, if users were "manually" running tasks (e.g. by calling ti.run() directly, or command line airflow tasks run), try number will no longer be incremented. Airflow assumes that tasks are always run after being scheduled by the scheduler, so we do not regard this as a breaking change.

/logout endpoint in FAB Auth Manager is now CSRF protected (#40145) """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

The /logout endpoint's method in FAB Auth Manager has been changed from GET to POST in all existing AuthViews (AuthDBView, AuthLDAPView, AuthOAuthView, AuthOIDView, AuthRemoteUserView), and now includes CSRF protection to enhance security and prevent unauthorized logouts.

OpenTelemetry Traces for Apache Airflow (#37948). """"""""""""""""""""""""""""""""""""""""""""""""" This new feature adds capability for Apache Airflow to emit 1) airflow system traces of scheduler, triggerer, executor, processor 2) DAG run traces for deployed DAG runs in OpenTelemetry format. Previously, only metrics were supported which emitted metrics in OpenTelemetry. This new feature will add richer data for users to use OpenTelemetry standard to emit and send their trace data to OTLP compatible endpoints.

Decorator for Task Flow (@skip_if, @run_if) to make it simple to apply whether or not to skip a Task. (#41116) """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" This feature adds a decorator to make it simple to skip a Task.

Using Multiple Executors Concurrently (#40701) """"""""""""""""""""""""""""""""""""""""""""""

... (truncated)

Commits

• e001b88 fix DagPriorityParsingRequest unique constraint error when dataset aliases ar...
• 8ea4eb1 Fix tests/decorators/test_python.py for database isolation tests (#41387)
• 6c6797c Fix mypy checks for new azure libraries (#41386)
• 09567dc Skip docs publishing on non-main brnaches (#41385)
• 34e2c9c bump uv version to 0.2.34 (#41334)
• ef147dd Fix pytests for Core except Variable for DB Isolation Mode (#41375)
• 9f3c1ae Fix Variable and KubernetesJobOperator Tests for Database Isolation Tests (#4...
• 2740c1c Fix core tests from start to SkipMixin for Database Isolation Mode (#41369)
• dc0548e Fix TriggerDagRunOperator Tests for Database Isolation Tests (#41298)
• a7d48cb Fix tests/models/test_taskinstance.py for Database Isolation Tests (#41344)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot[bot]]

The following labels could not be found: dependencies.

[dependabot[bot]]

Superseded by #40.