search

upsidedownlabs / msptool

MSP430G2xx3 flashing tool supporting Linux, Windows, and Mac OS.
Other
15 stars 3 forks source link

Code is not running after programming in Ubuntu 20.04 #2

Open danish-anwar-butt opened 3 years ago

danish-anwar-butt commented 3 years ago

Hi, Thanks for sharing such an awesome tool. I'm using your tool with the same hardware as shown in your figure with a change in RST -> RTS pin. The tool works fine on my windows 7 machine. When I try to upload blinky.txt in my Ubuntu 20.04 environment the program is written but the led is not blinking after upload. I'm using windows and Ubuntu as dual-boot on the same machine. I'm attaching a screenshot of the command run: Screenshot from 2021-09-11 16-42-28

Regards, Danish

lorforlinux commented 3 years ago

Hey @danish-anwar-butt, that is odd as you are successfully uploading the firmware to the chip. Please try manually resetting the chip after uploading the firmware and let me know if the LED blinks.

danish-anwar-butt commented 3 years ago

Hi, Thanks for your fast reply. Yes, I reset the device manually by unplugging and plugging again the USB port. But no success :(