search

usbarmory / usbarmory-debian-base_image

USB armory Debian base image
Other
77 stars 30 forks source link

can not boot from eMMC #28

Closed peko19 closed 4 years ago

peko19 commented 4 years ago

the same image is booting from microSD card with no problem, but from mmc got this on serial:

Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... Card did not respond to voltage select! Card did not respond to voltage select! zimage: Bad magic!

abarisani commented 4 years ago

The uSD and eMMC images require different configuration, how did you compile and image the eMMC card?

Thanks

peko19 commented 4 years ago

i just used the precompiled one and flashed it in the UMS mode with dd and later with etcher too. please could i somewhere get a precompiled bootloader?

abarisani commented 4 years ago

The pre-compiled image is only for uSD. For eMMC you have to build your own as shown at https://github.com/f-secure-foundry/usbarmory-debian-base_image