search

ut-robotics / picr21-team-sauna-madis

0 stars 0 forks source link

[Mechanics] - Motor mounting hole dimensions #1

Closed maidlam closed 2 years ago

maidlam commented 2 years ago
  1. Currently, the thrower motor can only be attached with 2 bolts.

thrower mounting holes

The distances between the holes are 16 mm in one axis and 19 mm in the other axis. Bolt holes in https://hobbyking.com/en_us/ntm-prop-drive-28-26-1000kv-235w.html?___store=en_us

  1. It would be better if the distance to the thrower motor was defined by the center of the motor - changing the current dimension of 9,5 mm causes the center of the motor to move out of place.
KasperKaljuste commented 2 years ago

Fixed the dimensions.

maidlam commented 2 years ago

The sketch is not fully defined. Set the distances to the blue circles and add an axis through the center of the bigger circle so that the two axis of the holes are perpendicular to each other. The 18.082 dimension feels weird there. Fusion360_2021-09-29_20-07-37

KasperKaljuste commented 2 years ago

Should be solved.

Akustav commented 2 years ago

Holes are now OK