search

ut-robotics / picr21-team-shaq

0 stars 1 forks source link

Improve reference designator locations on PCB #48

Closed ReikoR closed 2 years ago

ReikoR commented 2 years ago

Make sure that reference designators are not overlapping pads or other silkscreen and are not under components.

I marked some problems:

image

ReikoR commented 2 years ago
  1. Too small text used: image

JLCPCB recommendations: Minimum Line Width: 0.153mm Minimum text height: 1.0mm https://jlcpcb.com/capabilities/Capabilities

  1. Designator on pad: image
ReikoR commented 2 years ago

Designators on be bottom are below components:

image