Closed ReikoR closed 1 year ago
There is an empty text outside the board, that seems to be part of motor driver footprint. Using Tools -> Update From PCB Libraries... should fix this problem.
Related to previous, the "Designator119" text should be removed from the motor driver footprint.
It's not correct to set Silk to Solder Mask Clearance to 0mm. \ JLCPCB minimum recommended clearance is 0.15mm: The Minimum Distance Between Pad and Silkscreen is 0.15mm. https://jlcpcb.com/capabilities/pcb-capabilities \ Some of the problems: \ Either the silkscreen on the footprint or the component placement can be adjusted to fix these problems.
Use Tools -> Design Rules Check... and fix the errors reported on the Messages panel.