Needs delay before setting call volume

GoogleCodeExporter commented 9 years ago

Using JB 4.2.2 on Nexus 4.

Needs a delay before setting the call volume, because it doesn't change the BT 
call volume which is a separate channel. I.e. do the same as it does for the 
media volume.

Possibly 4.2 specific?

Rick

Original issue reported on code.google.com by rickpjo...@gmail.com on 29 Apr 2013 at 7:58

GoogleCodeExporter commented 9 years ago

This issue was closed by revision fb0f9f3fce5f.

Original comment by JimR...@gmail.com on 7 Sep 2013 at 4:18

Changed state: Fixed

GoogleCodeExporter commented 9 years ago

Please test 2.9.8 and report results.

Original comment by JimR...@gmail.com on 7 Sep 2013 at 4:25

GoogleCodeExporter commented 9 years ago

For various reasons it's taken me a while to install this and test it in a real 
scenario. However, it doesn't actually resolve the problem.

There is a delay before the call volume is set, but the channel which is 
adjusted is still the regular call volume, not the BT call volume. Possibly 
because at this point the active BT service is A2DP, not voice?

It's obviously a bit of a conundrum, I don't know if there's a specific BT 
voice channel accessible to the app, or whether you can only do it by 
activating BT voice (as if on a call) and then adjusting call volume.

Perhaps it's too complicated to be worth it, but it's annoying that you have to 
fiddle with the phone volume if you get a call while driving in order to hear 
the caller! The core fault is with Android here of course, these work-rounds 
shouldn't really be required. It'd be nice if you could find a way to do it 
though.

Original comment by rickpjo...@gmail.com on 13 Oct 2013 at 7:16

utonlenggu90 / a2dpvolume

Needs delay before setting call volume #163