Open jontis opened 4 years ago
Looking at the .inf file, it appears that the driver GUID is the same as for 0097
and 009a
(96710705-B080-4B29-A3EC-B16935AE663A
), which means that synaWudfBioUsb-sandbox approach might just work. Have you tried renaming synaWudfBioUsb66.dll
to synaWudfBioUsb.dll
and following the rest of synaWudfBioUsb-sandbox
instructions? I know, it's not an easy task. I've tried to make synaWudfBioUsb-sandbox
and wine
setup to be a bit more user friendly but got bogged down by the Wine packaging and gave up.
Do you know if your sensor is Match-on-Sensor or Match-on-Host?
@uunicorn I'm about done writing up some instructions for building the patched Wine in a Debian container, happy to open a PR for it if you're interested.
I can absolutely try to rename the dll. What about: Copy *.xpfwext file from the extracted windows driver to c:\windows\system32 inside youre new Wine prefix There is no such file.
The sensor is claimed to be match-on-host.
There is no such file.
Well, fwext is just an overlay on top of firmware in ROM. Perhaps it is not needed for this device.
The .inf file has an empty [FWextCopy]
section, which implies that it is expected.
synaWudfBioUsb-sandbox
may still work.
The sensor is claimed to be match-on-host.
This is unfortunate. python-validity
lacks support for MoH devices at the moment.
I've provided a bit more details in this comment.
Interesting. Thank you for explaining.
In that case, I might get it's younger sibling to experiment with adding support. It announced to be match-in-sensor.
Kensington VeriMark IT Fingerprint Key
What do you think of this?
What do you think of this?
I think we can definitely try. Probably worth raising another issue with a correct usb id.
I apologise, I think I've gone and made a new thread, when I should have read this one. Am I correct in interpreting this discussion as the :0088 device isn't going to work / may not ever work?
I apologise, I think I've gone and made a new thread, when I should have read this one. Am I correct in interpreting this discussion as the :0088 device isn't going to work / may not ever work?
You should look for Validity90, that one is generally for MoH.
@jaxjexjox
isn't going to work / may not ever work?
It is not that it may never work, it is just (unlike Validity90
) there is no existing framework to do the fingerprint matching inside the python-validity
code at the moment. You are more than welcome to contribute it though.
I apologise, I think I've gone and made a new thread, when I should have read this one. Am I correct in interpreting this discussion as the :0088 device isn't going to work / may not ever work?
You should look for Validity90, that one is generally for MoH.
I thought it was all but abandoned several years ago?
Well, yes, but that is the most relative project.
I think @3v1n0 's branch of fprintd
is still alive: https://github.com/3v1n0/libfprint
Thanks for your hard work and replies, people like you make using free software awesome, appreciate it.
About Validity90, I just want to add that I wouldn't call it abandoned. I think the project was making progress and had a lot of traction among users. Then the owner disappeared. No idea if something happened to him, or if he got tired of the project and made a new github identity. I believe something happened to him, or he would have transferred ownership of the project. 3v1n0 picked it up, but it doesn't seem to keep the same pace.
Found another one in the wild
ID 06cb:0089 Synaptics, Inc.
https://www.amazon.com/gp/product/B07D3N3QHJ/
Works with Windows Hello after it grabs a Synaptics driver.
Bus 001 Device 005: ID 06cb:0089 Synaptics, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 16
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x06cb Synaptics, Inc.
idProduct 0x0089
bcdDevice 1.54
iManufacturer 0
iProduct 0
iSerial 1 b77c94008419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Hi, I started following your: https://github.com/uunicorn/synaWudfBioUsb-sandbox
But encountered a slightly different folder structure and that's about where my skills end. The item is a Kensington Verimark USB fingerprint reader. If you could determine if it is suitable for this project and guide me how to proceed, I'd be happy to help.
Folder structure of the driver is: KensingtonFingerprintApplication.exe KensingtonFingerprintApplication.lnk synaBscAdapter66.dll SynaCP66.dll SynaFPCoInstaller.dll SynaFPService.exe synahidumdf.sys SynaU2F.exe synaumdf.cat synaWudfBioUsb66.dll synaWudfBioUsbKensProd.inf synaWudfU2fhid.dll synaWudfU2fhid.ini WudfUpdate_01011.dll
synaWudfBioUsbKensProd.inf.txt