search

uvjim / linksys_velop

Home Assistant integration for the Linksys Velop
MIT License
50 stars 7 forks source link

The [name] node is no longer on the Mesh or it's unique ID has changed. #495

Closed gndenton closed 3 weeks ago

gndenton commented 3 weeks ago

After updating to version 2024.10.2, I had 3 nodes out of 5 nodes reporting an error with the next step being removal of those nodes from Home Assistant. My primary nodes was not listed.

What are my next steps after removing the nodes to return to "normal".

Thank you in advance.

uvjim commented 3 weeks ago

Try reloading the integration. If the API is still reporting the nodes they should be recreated as devices in Home Assistant.

gndenton commented 3 weeks ago

Thank you for the quick response.

I deleted one of the nodes and when I try to re-add it to the system, I get a pop-up asking for primary node IP address, and password, but no ID request. The action fails since there is no ID being entered or submitted to Linksys.

Thanks again, Gary

Gary N. Denton Mobile: +1 (317) 430-3051 Email: @.***

From: uvjim @.> Sent: Sunday, November 3, 2024 11:08:08 AM To: uvjim/linksys_velop @.> Cc: Gary Denton @.>; Author @.> Subject: Re: [uvjim/linksys_velop] The [name] node is no longer on the Mesh or it's unique ID has changed. (Issue #495)

Try reloading the integration. If the API is still reporting the nodes they should be recreated as devices in Home Assistant.

— Reply to this email directly, view it on GitHubhttps://github.com/uvjim/linksys_velop/issues/495#issuecomment-2453479607, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BATKJ73A3TP26XLTKCRCNMTZ6ZC6RAVCNFSM6AAAAABRC3H3OKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGQ3TSNRQG4. You are receiving this because you authored the thread.Message ID: @.***>

uvjim commented 3 weeks ago

You shouldn't need to enter a username because it users the router password which has a well known username. It sounds like you're attempting to use the cloud account details, which you shouldn't be using.

gndenton commented 3 weeks ago

yes - I am embarrassed to say you are correct. Once I tried the local password, I tried to add a device. There were no other input questions, but there is a completion pop-up stating "Device already configured".

Again, my apologies.

Gary N. Denton Mobile: +1 (317) 430-3051 Email: @.***

From: uvjim @.> Sent: Sunday, November 3, 2024 1:42:11 PM To: uvjim/linksys_velop @.> Cc: Gary Denton @.>; Author @.> Subject: Re: [uvjim/linksys_velop] The [name] node is no longer on the Mesh or it's unique ID has changed. (Issue #495)

You shouldn't need to enter a username because it users the router password which has a well known username. It sounds like you're attempting to use the cloud account details, which you shouldn't be using.

— Reply to this email directly, view it on GitHubhttps://github.com/uvjim/linksys_velop/issues/495#issuecomment-2453536472, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BATKJ72O2NUEQXNU2GRLXKDZ6ZVAHAVCNFSM6AAAAABRC3H3OKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGUZTMNBXGI. You are receiving this because you authored the thread.Message ID: @.***>

uvjim commented 3 weeks ago

Yes, if it's already configured it will say that. Rather than re-add (which would involve removing the integration and adding it again) you should be able to just tell it to reload. If a reload doesn't create the devices for the nodes, and the Linksys app shows the nodes as being online, then you'd be best to remove and add it again.

gndenton commented 3 weeks ago

That worked. It was a case of PEBKAC (problem exists between keyboard and chair).

Thanks. Okay to close.

Gary N. Denton Mobile: +1 (317) 430-3051 Email: @.***

From: uvjim @.> Sent: Sunday, November 3, 2024 2:34:00 PM To: uvjim/linksys_velop @.> Cc: Gary Denton @.>; Author @.> Subject: Re: [uvjim/linksys_velop] The [name] node is no longer on the Mesh or it's unique ID has changed. (Issue #495)

Yes, if it's already configured it will say that. Rather than re-add (which would involve removing the integration and adding it again) you should be able to just tell it to reload. If a reload doesn't create the devices for the nodes, and the Linksys app shows the nodes as being online, then you'd be best to remove and add it again.

— Reply to this email directly, view it on GitHubhttps://github.com/uvjim/linksys_velop/issues/495#issuecomment-2453551349, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BATKJ73GPZMKCCIPOZ3TI43Z6Z3CRAVCNFSM6AAAAABRC3H3OKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGU2TCMZUHE. You are receiving this because you authored the thread.Message ID: @.***>