search

uxora-com / xpenology-docker

Docker configured to run a KVM VirtualMachine of Xpenology dsm 6.2.3 ( and 7.0.1 with redpill)
43 stars 12 forks source link

No web UI available after startup #5

Closed Undeadhunter closed 3 years ago

Undeadhunter commented 3 years ago

It looks like it starts up fine, but no webUI comes up 

# docker logs xpenology
INFO: Start downloading bootloader from URL ...

     0K ........ ........ ........ ........ 64%  380M 0s
 32768K ........ ........ ..               100%  336M=0.1s
INFO: Bootloader has been successfully downloaded from URL.
INFO: /image/bootloader.raw file size seems valid for synoboot.
INFO: Bootloader has been converted to qcow2
INFO: No Initial Disk found, creating disk /image/vm-disk-1.qcow2
Formatting '/image/vm-disk-1.qcow2', fmt=qcow2 size=34359738368 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
INFO: KVM acceleration enabled
INFO: Configuring network ...
net.ipv4.ip_forward = 1
INFO: DHCP configured to serve IP 20.20.20.21/24 via dockerbridge
INFO: Lauching dnsmasq
DEBUG: dnsmasq options:  --dhcp-range=20.20.20.21,20.20.20.21 --dhcp-host=00:11:32:2C:A7:85,,20.20.20.21,VirtualMachine,infinite --dhcp-option=option:netmask,255.255.255.0                           --dhcp-option=option:dns-server,127.0.0.11patching file etc/rc
patching file etc/synoinfo.conf
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ehci-hcd ... [  OK  ]
:: Loading module ehci-pci ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module uhci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptsas ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mpt2sas ... [  OK  ]
:: Loading module mpt3sas ... [  OK  ]
:: Loading module sx8 ... [  OK  ]
:: Loading module aacraid ... [  OK  ]
:: Loading module aic94xx ... [  OK  ]
:: Loading module 3w-9xxx ... [  OK  ]
:: Loading module 3w-sas ... [  OK  ]
:: Loading module 3w-xxxx ... [  OK  ]
:: Loading module mvumi ... [  OK  ]
:: Loading module mvsas ... [  OK  ]
:: Loading module arcmsr ... [  OK  ]
:: Loading module isci ... [  OK  ]
:: Loading module hpsa ... [  OK  ]
:: Loading module nvme ... [  OK  ]
:: Loading module ata_piix ... [  OK  ]
:: Loading module virtio ... [  OK  ]
:: Loading module virtio_ring ... [  OK  ]
:: Loading module virtio_scsi ... [  OK  ]
:: Loading module virtio_pci ... [  OK  ]
:: Loading module virtio_blk ... [  OK  ]
:: Loading module aufs ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
All disk ready or timeout execeed
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/e2fsck.
Mounting /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
mount /dev/md0 fail, returns 
Exit on error [3] no init exists...
Wed Feb  3 10:26:35 UTC 2021
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=237796k,nr_inodes=59449,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 4188, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [  OK  ]
:: Loading module crc-ccitt ... [  OK  ]
:: Loading module crc-itu-t ... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module rng-core ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module ip_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module dca ... [  OK  ]
:: Loading module e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb ... [  OK  ]
:: Loading module be2net ... [  OK  ]
:: Loading module ixgbe ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module ipg ... [  OK  ]
:: Loading module jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading module sky2 ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading module pch_gbe ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading module qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading module netxen_nic ... [  OK  ]
:: Loading module sfc ... [  OK  ]
:: Loading module e1000 ... [  OK  ]
:: Loading module pcnet32 ... [  OK  ]
:: Loading module vmxnet3 ... [  OK  ]
:: Loading module bnx2 ... [  OK  ]
:: Loading module bnx2x ... [  OK  ]
:: Loading module igbvf ... [  OK  ]
:: Loading module ixgbevf ... [  OK  ]
:: Loading module r8101 ... [  OK  ]
:: Loading module r8125 ... [  OK  ]
:: Loading module r8169 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading module ax88179_178a ... [  OK  ]
:: Loading module button ... [  OK  ]
:: Loading module evdev ... [  OK  ]
:: Loading module atl2 ... [  OK  ]
:: Loading module e100 ... [  OK  ]
:: Loading module ixgb ... [  OK  ]
:: Loading module forcedeth ... [  OK  ]
:: Loading module tn40xx[    4.905513] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[    4.906158] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG 
 ... [  OK  ]
:: Loading module cxgb ... [  OK  ]
:: Loading module cxgb3 ... [  OK  ]
:: Loading module cxgb4 ... [  OK  ]
:: Loading module atlantic ... [  OK  ]
:: Loading module bna ... [  OK  ]
:: Loading module vxge ... [  OK  ]
:: Loading module aqc111 ... [  OK  ]
:: Loading module asix ... [  OK  ]
:: Loading module cx82310_eth ... [  OK  ]
:: Loading module et131x ... [  OK  ]
:: Loading module i40e ... [  OK  ]
:: Loading module i40evf ... [  OK  ]
:: Loading module mcs7830 ... [  OK  ]
:: Loading module pegasus ... [  OK  ]
:: Loading module plusb ... [  OK  ]
:: Loading module r8152 ... [  OK  ]
:: Loading module rtl8150 ... [  OK  ]
:: Loading module s2io ... [  OK  ]
:: Loading module xgmac ... [  OK  ]
:: Loading module virtio_net ... [  OK  ]
:: Loading module virtio_mmio ... [  OK  ]
:: Loading module virtio_balloon ... [  OK  ]
:: Loading module 9pnet ... [  OK  ]
:: Loading module 9pnet_virtio ... [  OK  ]
:: Loading module 9p ... [  OK  ]
:: Loading module synobios ... [  OK  ]
udhcpc (v1.16.1) started
eth0      Link encap:Ethernet  HWaddr 00:11:32:2C:A7:85  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0011322ca785::upnp:rootdevice
(55): Synology/synology_bromolow_3615xs/6.2-23739/20.20.20.21
(44): http://20.20.20.21:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 20.20.20.21 0011322ca785 6.2-23739 synology_bromolow_3615xs eth0
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [  OK  ]
:: Loading module usbhid ... [  OK  ]
============ Date ============
Wed Feb  3 10:26:42 UTC 2021
==============================
starting pid 6592, tty '': '/sbin/getty 115200 console'

Wed Feb  3 10:26:43 2021
mfischl commented 3 years ago

Same here. @Undeadhunter did you reach any solution on this? I am getting the exact same output as you do, so it has to be something minor.

caia400 commented 3 years ago

Same here.

uxora-com commented 3 years ago

Congratulation! It seems you succeed to make it work! The webUI does not come up by itself, you need to open a web browser and enter the docker host IP address with port 5000 (by default if it is not changed in config). ie: 192.168.1.25:5000