Radio_tool

[jpalcantara]

Hello,

I am running your tool on the latest Debian POPOS on VM and trying to upload the firmware from openTRX to UV 380 and I was successful in the past, but now the USB port is not seen. I remember doing something before uploading the Firmware so the port would be open.

Any idea?

[v0l]

Hey, why use a VM? There is a windows & mac version too

[jpalcantara]

Can you give the link for the Windows?  I saw something but it a dead link.On 24 May 2024, at 14:29, Kieran @.***> wrote: Hey, why use a VM? There is a windows & mac version too

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

[v0l]

On the releases the builds are listed: https://github.com/v0l/radio_tool/releases/download/v0.2.2/radio_tool-0.2.2-Windows.zip

[jpalcantara]

I found the program and same problem!On 24 May 2024, at 14:29, Kieran @.***> wrote: Hey, why use a VM? There is a windows & mac version too

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

[jpalcantara]

OK I have the Windows version and I get the same message. The driver are installed and running Win11 with the compatibility option.

radio_tool>radio_tool -d 0 -f -i openrtx_md3x0_v0.3.6.bin [0] Failed to open device VID=0x0483, PID=0xdf11 (LIBUSB_ERROR_NOT_SUPPORTED) Error: Failed to enumerate serial ports