vadpro163rus / er9x

Automatically exported from code.google.com/p/er9x
0 stars 0 forks source link

Please add PCM modulation for use for SIMULATOR, connected by the audio card. #709

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
Please add PCM modulation - PCM (Walkera, JR, Futaba, Sanwa, Airtronics).

This is used by all who use their radios connected by the sound card for use 
with simulator by an audio cable.

For this purpose the PPM signal is jittery and with low res, and PCM (the 
original implemented in the stock ROM) was perfect - no jitter, high res. Note 
that there is no problem with the PPM signal used with real hardware.

SmartPropoPlus is the only way I know of to connect a controller via the 
computer audio input and it supports PCM (Walkera, JR, Futaba, Sanwa, 
Airtronics). http://www.smartpropoplus.com/dnn/

Original issue reported on code.google.com by regli...@gmail.com on 30 Aug 2012 at 7:14

GoogleCodeExporter commented 8 years ago
were you able to get er9 to work with a simple audio cable even in PPM mode? I 
was not able to get its output recognized by smartpropoplus at all, even though 
I could output the audio and physically hear the sound changing as I moved the 
controls.

Original comment by InfoTech...@gmail.com on 7 Jan 2014 at 7:14

GoogleCodeExporter commented 8 years ago
In PPM mode it is difficult to play a flight sim.  The orginal PCM worked great 
except the trim didnt work to get the throttle down below 5%.  Using smartpropo 
and Vjoy things worked great.  I cannot seem to find PCM mode in er9x 816, I 
hope it can be added!

Original comment by stylesm...@gmail.com on 12 Jan 2015 at 9:21

GoogleCodeExporter commented 8 years ago
The main problem to adding this is the FrSky version of er9x on the ATMEGA64 
has very little space left in the flash memory for adding anything like this.
What hardware (processor) and version are you using?

Original comment by michael....@mypostoffice.co.uk on 13 Jan 2015 at 11:38

GoogleCodeExporter commented 8 years ago
I have the original Turnigy radio. With an audio cable and PPM it works, but 
jittery. With the original implemented in the stock ROM PCM it was rock-solid. 
So I ordered a USB dongle (emulator) and do not use audio cable anymore.

Original comment by regli...@gmail.com on 20 Jan 2015 at 3:33