search

varghes / Raspberry-QNX

Raspberry Pi -QNX ( BCM2835 )
Apache License 2.0
141 stars 63 forks source link

won't boot #3

Closed Akiruoss closed 4 years ago

Akiruoss commented 5 years ago

Hello I've copied working_images files into my sdcard power my raspberry pi but on the screen it's stuck on

Starting application at 0x00200000

Regards Aki

varghes commented 5 years ago

it works only on https://www.raspberrypi.org/products/raspberry-pi-1-model-b-plus/ .. , which hardware are u using ?

Akiruoss commented 5 years ago

hello and thankyou for your reply i'm using this one

https://www.sparkfun.com/products/retired/11546

Il giorno mar 12 feb 2019 alle ore 18:02 Varghese Alphonse < notifications@github.com> ha scritto:

it works only on https://www.raspberrypi.org/products/raspberry-pi-1-model-b-plus/ .. , which hardware are u using ?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/varghes/Raspberry-QNX/issues/3#issuecomment-462843982, or mute the thread https://github.com/notifications/unsubscribe-auth/AtXDnXzTvRg2xV14VzK-fzDztXfWWu11ks5vMvO-gaJpZM4a2Xdf .

marvinyane commented 5 years ago

Hi, my RSP B+ wont boot too.

-Boot 2016.09-rc1-g8097d58 (Aug 31 2017 - 11:52:20 -0700)

DRAM:  128 MiB
RPI: Board rev 0x3 unknown
RPI Unknown model (0x900032)
boot regs: 0x00000000 0x00000000 0x00000000 0x00000000
MMC:   bcm2835_sdhci: 0
reading uboot.env

** Unable to read "uboot.env" from mmc0:1 **
Using default environment

In:    serial
Out:   lcd
Err:   lcd
Net:   Net Initialization Skipped
No ethernet found.
starting USB...
USB0:   Core Release: 2.80a
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 
Error: sms0 address not set.
Warning: failed to set MAC address
1 Ethernet Device(s) found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
128 bytes read in 9 ms (13.7 KiB/s)
## Executing script at 02000000
reading ifs-bcm2835.bin
44501704 bytes read in 3062 ms (13.9 MiB/s)
## Starting application at 0x00200000 ...�B��������(��������쥥�������쬍���������X�
                                                                                     X��杍���O�������������F�������������������������B���$�����������������������B���D���約��
                                                                                                                                                                               �֎����޵۝�鬴����������Ԗ��̴����������m������B�������„�������
     �䵤������B�����
varghes commented 5 years ago

Rpi3 support not added, rpi3 uses different interrupt ip + memory mapping is different. This works only on rpi 1. Plans are there to support other boards also

marvinyane commented 5 years ago

Rpi3 support not added, rpi3 uses different interrupt ip + memory mapping is different. This works only on rpi 1. Plans are there to support other boards also

Sorry for spelling mistake， I use RPI1 B+ to test it.

varghes commented 5 years ago

U-Boot 2016.09-rc1-g8097d58 (Aug 31 2017 - 11:52:20 -0700)

DRAM: 448 MiB RPI Model B+ (0x10) boot regs: 0x00000000 0x00000000 0x00000000 0x00000000 MMC: bcm2835_sdhci: 0 reading uboot.env

Unable to read "uboot.env" from mmc0:1 Using default environment

In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr reading /boot.scr 128 bytes read in 12 ms (9.8 KiB/s)

Executing script at 02000000

reading ifs-bcm2835.bin 44501704 bytes read in 3038 ms (14 MiB/s)

Starting application at 0x00200000 ...

PIO init : CPU0: Dcache: 512x32 WB CPU0: Icache: 512x32 CPU0: VFP 410120b5 CPU0: 410fb767: arm1176 rev 7 700MHz Loading IFS...done elf_map: 1M va=fe000000 pa=00200000 sz=00100000 elf_map: 1M va=fe000000 pa=00200000 sz=00100000 Header size=0x0000009c, Total Size=0x00000520, #Cpu=1, Type=4 Section:system_private offset:0x000001c8 size:0x00000068 syspage ptr user:fc404000 kernel:fc404000 cpupage ptr user:fc4048a0 kernel:fc4048a0 spacing:84 kdebug info:00000000 callback:00000000 boot pgms: idx=0 0) base paddr:00213000 start addr:fe04604c ramsize:00000000 pagesize:00001000 Section:qtime offset:0x00000148 size:0x00000060 boot:00000000 CPS:00000000000f4240 rate/scale:1000000000/-15 intr:3 flags:00000000 load:0 epoch:1970 rr_mul:0 adj count/inc:0/0 Section:callout offset:0x000000a0 size:0x00000048 reboot:fc404710 power:00000000 timer_load:fc404734 reload:fc404760 value:fc4047a0 0) display:fc4047c0 poll:fc4047e4 break:fc404808 1) display:00000000 poll:00000000 break:00000000 Section:cpuinfo offset:0x000001a8 size:0x00000020 0) cpu:410fb767 flags:c0000006 speed:000002bc cache i/d:1/0 name:45 Section:cacheattr offset:0x000004e0 size:0x00000040 0) flags:32 size:0020 #lines:0200 control:fc404520 next:255 1) flags:11 size:0020 #lines:0200 control:fc404588 next:255 Section:meminfo offset:0x00000520 size:0x00000000 Section:asinfo offset:0x000002e0 size:0x000001c0 0000) 0000000000000000-00000000ffffffff o:ffff a:0010 p:100 c:00000000 n:21 0020) 0000000000000000-00000000ffffffff o:0000 a:0010 p:100 c:00000000 n:28 0040) 0000000000200000-00000000101fffff o:0020 a:0017 p:100 c:00000000 n:36 0060) 0000000000000000-00000000ffffffff o:ffff a:0010 p:100 c:00000000 n:21 0080) 0000000000200000-00000000101fffff o:0060 a:0007 p:100 c:00000000 n:40 00a0) 000000000020f110-0000000002c70ac7 o:0000 a:0005 p:100 c:00000000 n:53 00c0) 0000000000200008-000000000020f10f o:0000 a:0007 p:100 c:00000000 n:61 00e0) 000000000020f110-0000000002c70ac7 o:0000 a:0007 p:100 c:00000000 n:69 0100) 0000000000000000-00000000ffffffff o:ffff a:0010 p:100 c:00000000 n:77 0120) 00000000fe014000-00000000fe090fcc o:0100 a:0000 p:100 c:00000000 n:85 0140) 0000000000200000-0000000000200007 o:0040 a:0007 p:100 c:00000000 n:91 0160) 0000000002c70ac8-0000000002c7afff o:0040 a:0007 p:100 c:00000000 n:91 0180) 0000000002c838f4-0000000002dcffff o:0040 a:0007 p:100 c:00000000 n:91 01a0) 0000000002fd0000-00000000101fffff o:0040 a:0007 p:100 c:00000000 n:91 Section:hwinfo offset:0x000002b8 size:0x00000028 0) size:3 tag:3(Group) isize:3, iname:0(hw), owner:65535, kids:1 12) size:3 tag:17(Bus) isize:3, iname:9(unknown), owner:0, kids:0 Section:typed_strings offset:0x00000230 size:0x00000020 off:0 type:5 string:'UNKNOWN' off:12 type:2 string:'localhost' Section:strings offset:0x00000250 size:0x00000068 [0]'hw' [3]'Group' [9]'unknown' [17]'Bus' [21]'memory' [28]'below4G' [36]'ram' [40]'1to1' [45]'arm1176' [53]'imagefs' [61]'startup' [69]'bootram' [77]'virtual' [85]'vboot' [91]'sysram' Section:intrinfo offset:0x000004a0 size:0x00000040 0) vector_base:00000000, #vectors:64, cascade_vector:7fffffff cpu_intr_base:00000000, cpu_intr_stride:0, flags:0000 id => flags:8000, size:0068, rtn:fc4045d0 eoi => flags:9000, size:0048, rtn:fc404638 mask:fc404680, unmask:fc4046c8, config:00000000 Section:smp offset:0x00000520 size:0x00000000 Section:pminfo offset:0x00000520 size:0x00000000 Section:mdriver offset:0x00000520 size:0x00000000 Section:boxinfo offset:0x00000520 size:0x00000000 Section:cpu offset:0x00000128 size:0x00000020 page_flush:fc404594 page_flush_deferred:fc4045c8 upte_ro:00000a2e upte_rw:0000083e kpte_ro:0000021e kpte_rw:0000001e mask_nc:0000000c ttb_attr:00000010 pte_attr=00000009 mmu_cr1:00051878 set:00e0387f clr:00000300 -> 00e5387f Jumping to QNX

System page at phys:02c83000 user:fc404000 kern:fc404000 Starting next program at vfe04604c cpu_startnext: cpu0 -> fe04604c Welcome to QNX Neutrino 6.5 on the Raspberry pi Starting slogger and pipe servers... Starting DBGU driver... opening ... Serial opened... Starting graphics driver Starting Touchscreen driver... Init over...

ls

.ph dev lib tmmp usr bin etc proc tmp var #

varghes commented 5 years ago

I tried checking the same with few SD cards .. 8GB/strontium, 32/16GB/HP, 16GB/SanDisk all works fine. I use Windows OS formatting tool , fat32 /32kb unit size..

marvinyane commented 5 years ago

Hi,

After change bootcode.bin/start* to git@github.com:raspberrypi/firmware.git tag : 1.20160620, the issue fixed, QNX has boot up normally.

varghes commented 5 years ago

thats great ..

VictorGoiano commented 4 years ago

Hello

First of all, let me congratulate for your work! I only have RPI Model B, it's very similar to yours, how can i get a working image for this hardware? Could you give me some tips?

varghes commented 4 years ago

Hello

First of all, let me congratulate for your work! I only have RPI Model B, it's very similar to yours, how can i get a working image for this hardware? Could you give me some tips?

Copy the "Raspberry-QNX/working_image/" files to FAT formatted SD card & boot the Raspberry PI .. To access the QNX shell connect USB-UART to Raspberry &use PUTTY tool