search

vdbrink / vdbrink.github.io

Home Automation Documentation Tips and Tricks for applications like NODE-Red, Home Assistant.
8 stars 1 forks source link

Flat cable to small #1

Closed Kweetni01 closed 2 years ago

Kweetni01 commented 2 years ago

I was trying to get my Orcon working on Home assistant. I've got all the bits and started connecting everything. But the connection on my Orcon controller is wider then my flat cable. And on your photo it also looks different.

Is there a sollution for this?

James

Flat cable

vdbrink commented 2 years ago

Nice to hear from you that you createone yourself! The problem is that you have an 0.5 mm wide cable and adapter. You can read it also on the adapter on your photo. In my required hardware section you can read that you need the 1 mm version. https://vdbrink.github.io/esphome/orcon_mechanic_ventilation#required-hardware

Good luck!

Kweetni01 commented 1 year ago

Thanks a lot. A newbie-fault. 😊

Van: vdbrink @.> Verzonden: dinsdag 13 september 2022 15:14 Aan: vdbrink/vdbrink.github.io @.> CC: Kweetni01 @.>; Author @.> Onderwerp: Re: [vdbrink/vdbrink.github.io] Flat cable to small (Issue #1)

Nice to hear from you that you createone yourself! The problem is that you have an 0.5 mm wide cable and adapter. You can read it also on the adapter on your photo. In my required hardware section you can read that you need the 1 mm version. https://vdbrink.github.io/esphome/orcon_mechanic_ventilation#required-hardware

Good luck!

— Reply to this email directly, view it on GitHub https://github.com/vdbrink/vdbrink.github.io/issues/1#issuecomment-1245396449 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AUMWNRW7MSCJCPW7JYOURI3V6B4ZDANCNFSM6AAAAAAQLLPECU . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AUMWNRSKABTPKWZTEHH34Y3V6B4ZDA5CNFSM6AAAAAAQLLPECWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSKHM66C.gif Message ID: @. @.> >