search

veebch / photon

A DIY incident light meter
GNU General Public License v3.0
499 stars 48 forks source link

Missing STL files? #33

Open dkallen78 opened 3 hours ago

dkallen78 commented 3 hours ago

I'm looking for the right STL files to use and I can't find a proper contact method. I noticed the directory for the original case is missing the top and back parts of the print. And when looking at the directory for the larger case, the STL is missing the aperture for one of the switches. I have a Pico with a LiPo shim so I can't use the LiPo case, and I have the Pimoroni sensor, not your custom one so I can't use the Photon+

veebch commented 2 hours ago

It seems I just missed you on chat. The original case is in need of an update. It used cut acrylic on the front and back. It was really just a shell and the pico lipo case has some nice elements in there (although it is missing a button).

The photon+ files should be going into the repo in the next couple of weeks. The moment that is done, I'll update the original case.

I recall you asking about the lumisphere. Unless you want to recalibrate the code to the sensor behind the lumisphere then you can use without.

dkallen78 commented 1 hour ago

no worries! is there any chance I can fit the Pico + shim and the original Pimoroni sensor in the Photon+ enclosure?

Thanks!

On Mon, Nov 18, 2024 at 1:29 PM VEEB Projects @.***> wrote:

It seems I just missed you on chat. The original case is in need of an update. It used cut acrylic on the front and back. It was really just a shell and the pico lipo case had some nice elements in there.

The photon+ stuff should be going into the repo in the next couple of weeks. The moment that is done, I'll update the original case.

I recall you asking about the lumisphere. Unless you want to recalibrate the code to the sensor behind the lumisphere then you can use without.

— Reply to this email directly, view it on GitHub https://github.com/veebch/photon/issues/33#issuecomment-2483924491, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHXV4E3TYNVIOYX5W6GBL6D2BI5YHAVCNFSM6AAAAABSAJ4Y2SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIOBTHEZDINBZGE . You are receiving this because you authored the thread.Message ID: @.***>