Set VGU180 EK supported registers

[jyrkij]

This is based on the support matrix on register group level found at https://www.en.nilan.dk/Files/Files/Engelsk/Downloads/7.%20Modbus%20-%20BACnet/2021-01-Modbus_CTS602_w_HMI350T_Modbus.pdf. All registers in a group might not be relevant for this device but are still "supported". Resolves #105.

[veista]

Unless you cross-check that the registers actually function, I won't have it. All registers are "supported" after modbus version 22.

[jyrkij]

Is there a way to disable registers that are supported by “all” from single device?

[veista]

Yes. Is there some "all" register that does not work on your device?

[jyrkij]

e.g. the supply air side. There is no supply air physically present.

[jyrkij]

I did (force) push again to the branch. I believe I've gone through almost all the registers and verified if they work or not, here's the breakdown

• VGU180 EK supports central heating
• supply air isn't physically present on this device
• humidity sensor isn't connected on my device so I cannot test that

Would you like a new pull request or reopening this one?

[veista]

You can reopen this one.

[jyrkij]

…I might be missing a permission to reopen this one as the button to do so isn’t there…

[veista]

For some reason I can't re-open this either. Just make a new one.